Skip to content

Microsoft Sentinel SIEM Log Source Analyzer

PowerShell 7+ Module Version Log Baseline


I've had to answer "what are we actually getting out of these logs?" or "what is the recommended logs for Microsoft Sentinel" more times than I can count. The answer always depend on so many things, but we can be generic. So I built this thingy right here.

Log Horizon connects to your Microsoft Sentinel workspace (and optionally Defender XDR), goes through every log table you're ingesting, and tells you whether you're getting security value from it or just burning money. It classifies tables, scores them against your detection rules, and gives you concrete recommendations with savings estimates.

Important: This is a generic approach. If you know a log source is important to your environment, that context always takes precedence over what this tool tells you. The classifications are a starting point, not gospel.

Want to read more? I have some posts about Log Horizon on my blog:

  1. Tool Release: Log Horizon
  2. Update: Log Horizon v0.5.0
  3. Building a practical log baseline and how Log Horizon helps you do that
  4. How to use Log Horizon
  5. Log Horizon 0.9.0

Features

Feature Description
Classification Engine 510-entry knowledge base covering 260+ connectors, 22 categories, with lifecycle status (deprecated/legacy plus replacement tables) and automatic heuristic fallback for unknown tables
Cost-Value Scoring Per-table cost tier vs detection tier matrix with combined assessment (High Value to Low Value), priced per observed plan (Analytics, Basic, Data Lake)
Recommendations 14 prioritised action types: data lake or Basic candidates, zero-detection tables, XDR streaming waste, ingest-time filtering, split candidates, shared-table splits by source, plan usage, deprecated sources, retention shortfalls, XDR Checker and Detection Analyzer findings, each with savings estimates
Detection Mapping Maps analytics rules, hunting queries, and XDR detections to each table to spot coverage gaps
Correlation Tags Detects #DONT_CORR# / #INC_CORR# tags in rule descriptions and flags rules excluded from Defender correlation
Retention Compliance Compares actual retention against recommended minimums based on industry standards and security best practices
SOC Optimisation Pulls Microsoft's own SOC improvement recommendations from the Security Insights API
Keyword Gap Analysis Flag tables you should be ingesting but aren't based on vendor/product keywords
Transform Discovery Discovers Data Collection Rules (DCRs) targeting the workspace (subscription list filtered on destination, the workspace transformation DCR, and workspace associations), parses inline and multi-stage transforms, and labels every operation (filter, projection, column removal, enrichment, aggregation)
Split Table Detection Identifies _SPLT_CL split tables and links them back to parent tables in the classification engine
Split KQL Generator Generates portal-ready split KQL from a curated knowledge base, live rule analysis, and community field frequency stats -- condition-only format that pastes straight into the Sentinel split rule editor. Field lists are intersected with the table's live schema; anything not present is reported as dropped
Detection Analyzer Scores analytic rules for potential noisiness using incident outcomes (auto-close ratio, false positive ratio, and incident volume percentiles)
XDR Checker Adds an XDR-focused advisory layer: streaming coverage checks and one-year Data Lake retention guidance for XDR-related telemetry
Custom Classifications Provide your own JSON to add or override the built-in classification database
Collection Cache Collected workspace data is cached locally (default 60 minutes) so re-runs and re-exports take seconds; opt out with -NoCache
Sovereign Clouds ARM, Log Analytics and Graph endpoints follow the signed-in Azure environment (public, US Government, China)
Interactive TUI Spectre.Console dashboard with menus, colour-coded tables, drill-downs, retention wizard and ASCII art
Export JSON, Markdown, or static HTML report for sharing with the team

Disclaimer

Caution

Disclaimer

This tool is developed and maintained with the help of AI. Please exercise caution when using this solution and always understand what are you running before you run it in production. The developer assumes no liability for any vulnerabilities or issues.

By downloading, installing, or using this tool, you acknowledge that you have read, understood, and agree to these terms.

Prerequisites

What you need Version
PowerShell 7.0+
Az modules Az.Accounts
Other modules PwshSpectreConsole 2.6.3+
Optional Microsoft.Graph.Authentication (for -IncludeDefenderXDR as a signed-in user)

Endpoints follow the Azure environment of the current Connect-AzAccount session, so Azure Government and Azure China workspaces work without extra parameters. The public cloud values are used when no environment is available.

If you're not already logged into Azure, the module will fire up Connect-AzAccount for you. If you are, it'll just carry on.

Permissions: Log Analytics Reader and Microsoft Sentinel Reader on the workspace cover the analysis. Transform discovery also needs Microsoft.Insights/dataCollectionRules/read (Monitoring Reader) on the subscription or resource group; without it the run continues and prints a warning naming the missing permission. -IncludeDefenderXDR uses Microsoft Graph with CustomDetection.Read.All, which for a signed-in user means the optional Microsoft.Graph.Authentication module.

Getting started

Pretty straight forward:

# Grab the dependencies
Install-Module -Name Az.Accounts -Scope CurrentUser
Install-Module -Name PwshSpectreConsole -Scope CurrentUser

# Clone and import
git clone https://github.com/lnfernux/log-horizon
Import-Module ./log-horizon/LogHorizon.psd1

Usage

The basics

Start by connecting to Azure and making sure you select the right account and subscription:

Connect-AzAccount

Then we can invoke the tool:

Invoke-LogHorizon -SubscriptionId '00000000-0000-0000-0000-000000000000' -ResourceGroup 'rg-sentinel' -WorkspaceName 'my-sentinel-ws'

Output should look something like this:

{F4FFA929-B24F-490C-BD3D-F75E214BCD93}

Also has a menu to dig deeper into other outputs:

{83CE9E6E-F373-49CD-BE05-182DB69F36BE}

Keyword gaps + Defender XDR

Want to know if you're missing tables related to specific vendors? Throw in some keywords. Add -IncludeDefenderXDR if you want the XDR analysis too.

Invoke-LogHorizon -SubscriptionId '...' -ResourceGroup 'rg' -WorkspaceName 'ws' -Keywords 'CrowdStrike','AWS','Okta' -IncludeDefenderXDR

Detection Analyzer

Enable rule quality/noise analysis based on incidents and automation rules:

Invoke-LogHorizon -SubscriptionId '...' -ResourceGroup 'rg' -WorkspaceName 'ws' -IncludeDetectionAnalyzer -DetectionLookbackDays 90

Export a report

# JSON
Invoke-LogHorizon -SubscriptionId '...' -ResourceGroup 'rg' -WorkspaceName 'ws' -Output json -OutputPath ./report.json

# Markdown
Invoke-LogHorizon -SubscriptionId '...' -ResourceGroup 'rg' -WorkspaceName 'ws' -Output markdown -OutputPath ./report.md

# Static HTML (self-contained, no JS, works offline)
Invoke-LogHorizon -SubscriptionId '...' -ResourceGroup 'rg' -WorkspaceName 'ws' -Output html -OutputPath ./report.html

# Auto-generate timestamped filename by pointing at a directory
Invoke-LogHorizon -SubscriptionId '...' -ResourceGroup 'rg' -WorkspaceName 'ws' -Output html -OutputPath ./reports/

Manage table retention and type

You can now update table retention and table type directly from the interactive TUI:

  • Open Invoke-LogHorizon normally, then choose Manage table retention and type from the main menu for bulk retention or type updates.
  • Open Log Tuning / Transforms > Evaluate specific table and choose Manage retention/type for this table for a single-table change.

For scripting or automation, use the dedicated public command:

# Preview a single-table change (prints a Table / Plan / Interactive / Total / Status / Reason table, applies nothing)
Set-LogHorizonTableRetention -SubscriptionId '...' -ResourceGroupName 'rg' -WorkspaceName 'ws' `
  -TableName 'SigninLogs' -TotalRetentionInDays 365 -WhatIf

# Switch tables to Basic and set total retention
Set-LogHorizonTableRetention -SubscriptionId '...' -ResourceGroupName 'rg' -WorkspaceName 'ws' `
  -TableName 'AzureDiagnostics','VMConnection' -TargetPlan Basic -TotalRetentionInDays 730

# Use -1 for inherit/default semantics
# RetentionInDays = inherit workspace default
# TotalRetentionInDays = remove long-term retention
Set-LogHorizonTableRetention -SubscriptionId '...' -ResourceGroupName 'rg' -WorkspaceName 'ws' `
  -TableName 'SigninLogs' -RetentionInDays -1 -TotalRetentionInDays -1

Non-interactive / CI mode

Skip the interactive TUI and export straight to a file, useful for pipelines or scheduled runs:

Invoke-LogHorizon -SubscriptionId '...' -ResourceGroup 'rg' -WorkspaceName 'ws' -NonInteractive -Output json -OutputPath ./reports/

If you omit -Output, the analysis object is returned to the pipeline so you can pipe it into your own logic.

Collection cache

The data collection phase (usage, rules, incidents, tables, DCRs) is cached by default so re-running against the same workspace, for example to export a second format or to reopen the TUI, takes seconds instead of minutes. The cache lives under $env:LOCALAPPDATA\LogHorizon\cache (override with -CachePath), one file per combination of subscription, resource group, workspace, -DaysBack, -DetectionLookbackDays, -IncludeDefenderXDR, -IncludeDetectionAnalyzer, -SkipSharedSources, the three price parameters and the module version. Entries older than -CacheMaxAgeMinutes (default 60) are ignored, and every save deletes expired entries so the folder does not accumulate files from other parameter sets or older versions. Tokens are never written to the cache; authentication runs on every invocation so the retention wizard always has live credentials.

The cache file is plaintext Clixml. With -IncludeDetectionAnalyzer it contains incident titles, numbers, status and classification from your workspace; incident owners, rule authors and assigned-owner identities are not collected. Use -NoCache on shared machines or point -CachePath at a location with the access control you need.

# Force a fresh collection and refresh the cache
Invoke-LogHorizon -SubscriptionId '...' -ResourceGroup 'rg' -WorkspaceName 'ws' -RefreshCache

# Never read or write the cache
Invoke-LogHorizon -SubscriptionId '...' -ResourceGroup 'rg' -WorkspaceName 'ws' -NoCache

# Accept cached data for up to a day
Invoke-LogHorizon -SubscriptionId '...' -ResourceGroup 'rg' -WorkspaceName 'ws' -CacheMaxAgeMinutes 1440

Log tuning and split KQL

The interactive TUI includes a Log Tuning / Transforms menu with live tuning suggestions (field usage from your deployed rules and hunting queries), knowledge-base split KQL, and a per-table evaluator. Every KQL block is condition-only and pastes straight into the Sentinel split rule editor, with source attribution (knowledge base, rule analysis, or combined).

Custom pricing

Default prices are West Europe Simplified PAYG in USD: 5.59 $/GB Analytics, 1.15 $/GB Basic, 0.20 $/GB Data Lake (0.065 ingestion + 0.13 processing, rounded). Each table is priced by the plan observed in the Usage table, and free status comes from Usage.IsBillable. Volumes use billing GB (1000 MB). If your commitment tier is different:

Invoke-LogHorizon -SubscriptionId '...' -ResourceGroup 'rg' -WorkspaceName 'ws' -PricePerGB 4.61 -BasicPricePerGB 1.15 -LakePricePerGB 0.20

All parameters

Parameter Type Required Default Description
-SubscriptionId string Yes - Azure subscription ID
-ResourceGroup string Yes - Resource group containing the Sentinel workspace
-WorkspaceName string Yes - Log Analytics workspace name
-WorkspaceId string No - Workspace ID (auto-resolved if omitted)
-Output string No - Export format: json, markdown / md, or html (alias -o)
-OutputPath string No - File or directory path for export. An existing directory or a trailing separator gets a timestamped file name; a file name without an extension gets the format's extension; missing directories are created
-Keywords string[] No - Keywords for gap analysis (e.g. 'AWS','CrowdStrike', alias -kw)
-IncludeDefenderXDR switch No - Include Defender XDR custom detection analysis
-IncludeDetectionAnalyzer switch No - Include per-rule noisy detection analysis using incidents and automation rules
-SkipSharedSources switch No - Skip the per-source volume query on CommonSecurityLog and Syslog (one 7-day scan per table)
-DetectionLookbackDays int No 90 Query window for incident/automation-based detection analysis (1-365 days)
-DaysBack int No 90 Query window for usage data (1-365 days)
-PricePerGB decimal No 5.59 Sentinel Analytics tier ingestion price per GB (alias -ppgb)
-BasicPricePerGB decimal No 1.15 Basic Logs price per GB
-LakePricePerGB decimal No 0.20 Auxiliary / Data Lake tier price per GB (ingestion + processing)
-NonInteractive switch No - Skip the TUI dashboard and export directly (or return data to pipeline if -Output is omitted)
-CustomClassificationPath string No - Path to a custom JSON file to add or override classifications (alias -clf)
-NoCache switch No - Do not read or write the collection cache
-RefreshCache switch No - Collect fresh data and overwrite the cache entry
-CacheMaxAgeMinutes int No 60 Maximum age of a cache entry to reuse (1-10080)
-CachePath string No $env:LOCALAPPDATA\LogHorizon\cache Directory for cache files

Under the hood

So there's four phases.

1. Data collection

The module connects to Azure and pulls data from the Log Analytics, Security Insights, Azure Monitor and Microsoft Graph APIs. Every call goes through a retry wrapper (429, 5xx and transport errors) and, unless -NoCache is set, the collected data is cached locally for the next run.

Data Source API What we grab
Table usage Usage table (KQL) Ingestion volume, plan and billable flag per table over your query window
Analytics rules Security Insights REST Active detection rules + which tables they hit + correlation tags, plus implicit table consumers for non-KQL rule kinds
Hunting queries Log Analytics saved searches REST Saved hunting queries + referenced tables
Data connectors Security Insights REST Installed connector inventory
SOC optimisation Security Insights REST (preview) Microsoft's built-in SOC recommendations
Table retention Log Analytics Tables REST Per-table retention, archive, plan (Analytics/Basic/Auxiliary), inherited-default flags and schema columns
Data collection rules Azure Monitor REST DCRs targeting the workspace (subscription list, workspace transformation DCR, associations) and their transforms
Defender XDR Microsoft Graph XDR custom detection rules (optional; delegated CustomDetection.Read.All or an Az Graph token)
Incidents Security Insights REST Incident outcomes (status/classification), timing, and rule-linking hints for rule quality scoring
Automation rules Security Insights REST Rule-level close-incident actions and title matching conditions for auto-close attribution
SentinelHealth Log Analytics KQL Automation rule run events with incident numbers for definitive auto-close attribution (optional, requires health monitoring)

2. Classification

Every table gets classified through two passes:

First, a direct lookup against the 510-entry knowledge base in Data/log-classifications.json. Each entry carries the connector name, primary/secondary classification, security category, MITRE data source mappings, a recommended pricing tier and retention, and optional lifecycle flags (deprecated/legacy with replacement tables, XDR streamability, platform).

If there's no match, heuristic rules kick in, in this order:

  • Name contains a security token such as Alert, Incident, Threat, Signin, Logon, Audit, Risk, Detection (matched at PascalCase word starts) -> primary
  • Name looks like infra telemetry: Flow, Metric, Diagnostic, Perf, Heartbeat, Health, Inventory, Usage -> secondary
  • Has active analytics rules pointing at it -> primary
  • Built-in table with a Microsoft prefix (AAD, Microsoft, Azure, Defender, Purview, Entra, Sentinel, Office, Intune, Windows ...) -> primary, flagged for review and addition to the database
  • Generic *Log/*Logs name -> secondary
  • High volume (>10 GB/mo) with nothing detecting on it -> secondary
  • None of the above -> unknown

3. Cost-value scoring

Each table gets scored on a few dimensions:

  • Cost tier: Free / Low (<1 GB) / Medium (1-10 GB) / High (10-50 GB) / Very High (>50 GB)
  • Detection tier: None / Low (1-2 rules) / Medium (3-9 rules) / High (10+ rules)
  • Assessment: High Value / Good Value / Missing Coverage / Optimize / Low Value / Underutilized / Free Tier / Platform
  • Coverage %: Percentage of tables with at least one analytics rule or hunting query referencing them, calculated as tablesWithRules / totalTables * 100. Per-table coverage sums analytics rules + hunting queries found by parsing KQL for table names. A rule that calls a solution parser (for example ADOAuditLogs) counts toward the parser's source tables, read from parsers in field-frequency-stats.json.
  • Implicit coverage: Rule kinds that carry no KQL still consume tables. Data/implicit-consumers.json maps them (Threat Intelligence matching -> ThreatIntelIndicators/ThreatIntelObjects, Fusion -> SecurityAlert/Anomalies, UEBA -> BehaviorAnalytics/UserPeerAnalytics/IdentityInfo, Microsoft incident creation -> SecurityAlert). Enabled rules of those kinds count toward effective coverage, and each table reports a CoverageSource of kql, xdr, implicit, platform or none. Platform tables Sentinel writes for itself (SecurityIncident, SentinelHealth, Watchlist, Usage ...) are never flagged as missing coverage and get the Platform assessment.
  • Only enabled analytics rules and enabled Defender custom detections count toward coverage.

Then the module generates recommendations (14 types):

Type When it fires What to do
Data Lake Secondary + high cost + few detections, and the table supports the Auxiliary plan (falls back to a Basic plan suggestion when only Basic is supported) Move to Auxiliary/Data Lake tier; savings are current cost minus the same volume at the lake (or Basic) rate
Low Value High cost + zero detections Add rules, filter, or move to data lake
XDR Optimise XDR-streamed + 0 Sentinel rules + XDR rules exist Stop streaming, use the unified XDR portal instead
Missing Coverage Primary + zero detections (not platform tables) Write analytics rules to get value from the data
Ingest-time Filter Primary + >20 GB + <=3 detections Apply ingest-time transformation to cut volume
Split Candidate Primary + high volume + detections + no existing transform Split the table so high-value rows stay on Analytics and the rest goes to Data Lake
Shared Table Split CommonSecurityLog or Syslog on the Analytics plan carries at least 1 GB/mo of sources the baseline recommends for the data lake, measured per source over a 7-day sample Apply the composed split condition from Log Tuning / Transforms > Shared table sources. It keeps the rows matched by where-conditions of enabled rules on the table and replaces the generic split estimate for that table
Plan Usage Usage rows show more than one plan, or the configured plan differs from what Usage observed Review whether the plan transition was expected
Deprecated Source A table marked deprecated or legacy in the database is still ingesting Migrate detections to the replacement tables, then retire the old connector. Informational: no savings are claimed because the ingestion moves rather than disappears
Retention Shortfall Workspace or table retention below the 90-day baseline Increase total/archive retention to meet regulatory guidance
Retention Improvement Paid, non-platform table meets 90d but sits below the category recommendation Consider longer total retention
Interactive Below Baseline Analytics table with interactive (hot) retention under 90 days Raise interactive retention to the 90 days Sentinel includes, unless the short hot window is deliberate
XDR Checker Known Defender XDR table not streamed, streamed without coverage, not forwarded to Data Lake, or below the one-year advisory Review streaming and retention for XDR telemetry
Detection Analyzer Rule scores >= 70 with at least 5 incidents, or has at least 5 closed incidents of which 80% or more were auto-closed by automation or closed as false positive (with -IncludeDetectionAnalyzer) Tune or disable the noisy rule

Recommendations are sorted once, High > Medium > Low and then by estimated savings, and every output (JSON, Markdown, HTML, TUI) keeps that order.

4. Detection Analyzer (noisiness scoring)

When you pass -IncludeDetectionAnalyzer, the module fetches recent incidents and automation rules, then scores every enabled analytics rule for potential noisiness.

Per-rule metrics (computed from incident data):

Metric How it's calculated
Incidents total Count of incidents linked to the rule
AutoClose ratio Incidents closed by automation rules ÷ closed incidents. Primary source: SentinelHealth table (automation rule runs by enabled close-incident or playbook rules, matched on incident number). Fallback: automation rule condition matching (analytic rule id, title and severity conditions, ANDed like Sentinel does). Rules whose conditions are only status/tactics/entities are treated as applying to every incident. With no enabled close rules, incidents closed within 5 minutes also count.
FalsePositive ratio Incidents classified as false positive ÷ closed incidents

Noisiness score formula:

Each metric is converted to a percentile rank across all rules that have at least one incident. The composite score is a weighted blend:

Score = (Volume_percentile × 0.35) + (AutoClose_percentile × 0.40) + (FalsePositive_percentile × 0.25)
  • Volume percentile (35%): how many incidents a rule generates relative to other rules.
  • AutoClose percentile (40%): how often incidents are auto-closed by automation rules (highest weight because automated closure is the strongest signal of low-value alerts).
  • FalsePositive percentile (25%): how often analysts classify the outcome as false positive.

Score thresholds:

Score Label Meaning
≥ 70 Noisy Rule likely needs tuning or disabling
≥ 50 Watch Rule shows early signs of noisiness
< 50 Healthy Rule is within normal range
N/A - Rule has no correlated incidents, or fewer than 3 rules have incidents so there is nothing to rank against

Incidents are bucketed by analytic rule id (falling back to rule name, then title), so two rules sharing a display name are scored separately.

Rules with a score ≥ 70 and at least 5 incidents are automatically surfaced as High-priority recommendations in the Recommendations view. So are rules with at least 5 closed incidents where 80% or more were auto-closed by automation (SentinelHealth or a matching close rule, not the 5-minute timing fallback) or closed as false positive. That ratio rule needs no population, so it still applies when fewer than 3 rules have incidents and the score is N/A.

5. Interactive dashboard

The main menu offers these views:

  • Dashboard: overview stats, top 10 costliest tables (deprecated and legacy sources carry a badge), coverage bar, retention compliance summary, correlation exclusion callout
  • View Recommendations: prioritised actions with estimated monthly savings, expandable to show the full list when there are more than 10
  • View Detection Assessment: cost-value matrix summary, per-table rule and hunting query coverage, primary/secondary drill-down, correlation-excluded rule listing
  • View Detection Analyzer: percentile-based noisy rule ranking with closure quality indicators (when you used -IncludeDetectionAnalyzer), searchable rule browser
  • View SOC Optimization: Microsoft's own improvement suggestions with drill-down
  • View Retention Assessment: tables below recommended minimums with current vs recommended retention, plan type, and shortfall, plus XDR advisory rows
  • View Data Transforms: DCR transform inventory with transform type classification and full KQL per table
  • Log Tuning / Transforms: live tuning suggestions, knowledge-base split KQL, and a per-table evaluator with a single-table retention/type change
  • View All Tables: the full list with classification, plans, cost, rules, retention (colour-coded), and assessment; pick a table for a detail panel (coverage sources, plan support, retention, status, its recommendations)
  • Manage table retention and type: bulk retention and plan wizard with preview and apply
  • Dictionary: every term the tool uses (classification, cost and detection tiers, assessments, coverage sources, the 14 recommendation types, Detection Analyzer metrics and score labels, table plans, lifecycle status, XDR states, transform types) with the same definitions as this README, served from Data/dictionary.json
  • Export Report: pick a format, then a path (directory for a timestamped file, or a file name; Enter keeps the current directory) and write JSON, Markdown or HTML right from the menu
  • XDR Analysis appears on the dashboard when you used -IncludeDefenderXDR

The classification database

Sitting at Data/log-classifications.json. 510 entries, 263 connectors, 22 categories.

The canonical data is maintained in log-baseline. A scheduled workflow checks for a newer log-baseline release once a day and opens a dependency pull request when it finds one. After review and merge, the versioned snapshot is bundled under Data/, so installations from PowerShell Gallery are self-contained and do not download baseline data at runtime. The bundled version, source commit, and checksums are recorded in Data/baseline-version.json. To vendor a release by hand, run ./scripts/Update-LogBaseline.ps1 -ArchivePath <log-baseline-x.y.z.zip>.

What's in each entry

Field What it holds
tableName Log Analytics table name (SecurityEvent, SigninLogs, etc.)
connector Which data connector produces this table
classification primary (security value) or secondary (supporting telemetry)
category Security category: Identity & Access, Network Security, etc.
description Plain-English summary of what's in the table
keywords Terms for keyword gap analysis matching
mitreSources MITRE ATT&CK data source mappings
recommendedTier analytics (hot tier) or datalake (auxiliary candidate)
recommendedRetentionDays Minimum recommended total retention in days (regulatory guidance)
isFree Whether Microsoft ingests this one for free (runtime uses Usage.IsBillable first)
status Optional. deprecated (connector retired or ingestion stopped) or legacy (older collection path with a documented successor)
replacedBy Optional. Table names to migrate to; present whenever status is set (may be empty)
xdrStreamable Optional, Defender tables only. true for the 21 tables the Defender XDR connector streams; false for portal-only and TVM tables
platform Optional. true for tables Sentinel itself consumes (SecurityIncident, Usage, Watchlist, ...) which never need analytics rules

Tables with a status show a badge in the TUI and the reports, and any that still ingest raise a DeprecatedSource recommendation naming the replacement. Tables with xdrStreamable: false are never treated as XDR streaming candidates by the XDR Checker.

Primary vs secondary security data

Primary (298 entries): the tables you're actually building detections on. Sign-in logs, security alerts, threat intel, audit trails, vulnerability findings, firewall hits, EDR telemetry.

Secondary (212 entries): supporting stuff. Perf metrics, infrastructure diagnostics, network flow volumes, inventory snapshots, config baselines, health checks.

Categories at a glance

Category Count Examples
Identity & Access 56 SigninLogs, MicrosoftServicePrincipalSignInLogs, OktaSSO
Network Security 51 AZFWNetworkRule, NSPAccessLogs, DarktraceModelAlerts_CL
Cloud Control Plane 37 AzureActivity, AZKVAuditLogs, GoogleWorkspaceReports
Network Flow 37 NTANetAnalytics, CommonSecurityLog, AZFWFatFlow
Endpoint Detection 33 DeviceProcessEvents, CrowdStrikeAuditEvents, SentinelOneAlertsV2_CL
Email Security 33 EmailEvents, CampaignInfo, Ttp_Url_CL
Security Alerts 32 SecurityAlert, SentinelBehaviorInfo, DisruptionAndResponseEvents
Application Logs 32 AppServiceHTTPLogs, AppServiceAuditLogs, DynatraceAttacksV2_CL
Vulnerability Mgmt 23 DeviceTvmSoftwareVulnerabilities, Rapid7InsightVMCloudVulnerabilities
Cloud Security 21 EnrichedMicrosoft365AuditLogs, OAuthAppInfo, PowerAppsActivity
Endpoint Telemetry 18 DeviceInfo, Windows365NetworkLogs, SentinelOneAgents_CL
Posture Management 18 ExposureGraphNodes, SecurityNestedRecommendation, ZTSMetadata
Data Security 17 PurviewDataSensitivityLogs, DataSecurityEvents, PowerPlatformDlpActivity
Data Platform 16 SQLSecurityAuditEvents, CDBControlPlaneRequests, SnowflakeLogin_CL
Threat Intelligence 15 ThreatIntelIndicators, ThreatIntelObjects, CybleVisionAlerts_CL
Infrastructure Diag 14 AzureMetrics, AGWPerformanceLogs, ContainerAppSystemLogs
Platform Health 14 SentinelHealth, Usage, SecurityCaseEvent
Container & K8s 13 AKSAudit, CloudProcessEvents, GKEAudit
Configuration Mgmt 12 ConfigurationData, AVNMRuleCollectionChange
SAP Security 8 ABAPAuditLog, SAPBTPAuditLog_CL, Onapsis_Defend_CL
Storage Access 6 StorageBlobLogs, CloudStorageAggregatedEvents, AWSS3ServerAccess
IoT/OT Security 4 RadiflowEvent, DragosAlerts_CL, Phosphorus_CL

Table plan support

Data/basic-plan-tables.json and Data/auxiliary-plan-tables.json list the built-in tables that the Azure Monitor table feature matrix marks as supporting the Basic and Auxiliary (Data Lake) plans. The retention wizard uses the Basic list to validate plan switches, and the DataLake recommendation only proposes the lake tier for tables that support it, falling back to a Basic plan suggestion where that is the lowest supported tier. DCR-based custom tables support both plans; Classic custom tables support neither. Both files are regenerated from that matrix for each release.

Custom classifications

You can provide your own classification file to add entries for tables not in the built-in database, or override existing entries when the defaults don't match your environment. Custom entries take precedence over built-in ones when the same tableName appears in both.

Invoke-LogHorizon -SubscriptionId '...' -ResourceGroup 'rg' -WorkspaceName 'ws' `
    -CustomClassificationPath './my-classifications.json'

The custom file uses the same schema as Data/log-classifications.json, an array of objects:

[
  {
    "tableName": "MyCustomApp_CL",
    "connector": "Custom Logs (DCR)",
    "classification": "primary",
    "category": "Application Logs",
    "description": "Security-relevant audit events from an internal application",
    "keywords": ["custom", "internal", "audit"],
    "mitreSources": [],
    "recommendedTier": "analytics",
    "isFree": false
  },
  {
    "tableName": "AzureMetrics",
    "connector": "Azure Monitor",
    "classification": "primary",
    "category": "Infrastructure Diag",
    "description": "Override: promoted to primary because we detect on Azure resource metrics in this environment",
    "keywords": ["metrics", "azure", "infrastructure", "monitoring"],
    "mitreSources": [],
    "recommendedTier": "analytics",
    "isFree": false
  }
]

See Data/custom-classifications-example.json for a ready-to-use template.

How the classifications were built

The primary/secondary grading was done partially by the author and then by feeding Microsoft's data connector and table definitions into AI with a human grading baseline, using Microsoft best practices and industry standards as the classification criteria.If something looks off for your environment, trust your own context over the tool - AI can make mistakes, and context is king.

The classification criteria were drawn from the following sources:

ACSC (Australian Signals Directorate, Australian Cyber Security Centre)

CISA (Cybersecurity and Infrastructure Security Agency)

Microsoft

MITRE

NIST (National Institute of Standards and Technology)

NSA (National Security Agency)

  • NSA Cyber Event Forwarding Guidance

NCSC-UK (National Cyber Security Centre - United Kingdom)

  • NCSC-UK's "What exactly should we be logging?"

Google Cloud

Other sources were also used, along with the authors "expertise" if you can categorize it as such.

Project layout

LogHorizon.psd1              Module manifest (v0.10.0)
LogHorizon.psm1              Module loader
Public/
  Invoke-LogHorizon.ps1              Entry point, the main orchestrator
  Set-LogHorizonTableRetention.ps1   Scriptable table retention and plan changes
Private/
  Connect-Sentinel.ps1       Azure auth + workspace resolution
  Get-TableUsage.ps1         KQL query for ingestion volumes
  Get-AnalyticsRules.ps1     Analytics rules + table/field extraction + correlation tags
  Get-HuntingQueries.ps1     Hunting queries + table extraction
  Get-DataConnectors.ps1     Data connector inventory
  Get-DataTransforms.ps1     DCR transform discovery, split KQL generation
  Get-DefenderXDR.ps1        Defender XDR analysis (optional)
  Get-Incidents.ps1          Incident fetch + SentinelHealth auto-close attribution
  Get-AutomationRules.ps1    Automation rule inventory + close-logic attribution
  Get-SocOptimization.ps1    SOC improvement recommendations
  Get-TableRetention.ps1     Per-table retention, archive, and plan type
  Get-SharedSourceUsage.ps1  Per-source volume in CommonSecurityLog / Syslog + composed split rule
  Get-CollectionCache.ps1    Collection cache (key, path, read, write)
  Get-LogHorizonEndpoint.ps1 ARM / Log Analytics / Graph endpoints for the signed-in Azure environment
  Get-LogHorizonDictionary.ps1 Loads the term dictionary shown by the Dictionary menu
  Invoke-AzRestWithRetry.ps1 REST wrapper: retry on 429/5xx/transport errors, async operation polling
  Invoke-Classification.ps1  Static DB + heuristic classification + _SPLT_CL detection + custom file validation
  Invoke-Analysis.ps1        Cost-value matrix + recommendations + Detection Analyzer + XDR Checker + split suggestions
  Set-TableRetention.ps1     Retention change set, preview, Tables API apply engine, plan support lookups
  Write-Report.ps1           Spectre.Console TUI rendering
  Export-Report.ps1          JSON / Markdown / static HTML export with shared section renderer
Data/
  log-classifications.json              946-entry classification knowledge base
  baseline-version.json                 Bundled log-baseline release version, source commit, and file checksums
  basic-plan-tables.json                Built-in tables that support the Basic plan (from the Azure Monitor feature matrix)
  auxiliary-plan-tables.json            Built-in tables that support the Auxiliary / Data Lake plan
  implicit-consumers.json               Non-KQL rule kinds to tables, plus platform tables
  dictionary.json                       Term definitions for the Dictionary menu (kept 1:1 with this README, enforced by tests)
  high-value-fields.json                Split KQL knowledge base: 165 tables with curated fields and split hints
  field-frequency-stats.json            Community field frequency stats mined from the Azure-Sentinel rule corpus
  shared-table-sources.json             CEF and Syslog sources in CommonSecurityLog / Syslog with row filters, tiers and split hints
  custom-classifications-example.json   Example custom classification override file
  ReportTemplate.html                   Static HTML report template (pure-CSS tabs, zero JS, CSP meta)
Tests/
  LogHorizon.Tests.ps1       475 Pester v5 unit tests

How the knowledge bases are generated

The split KQL knowledge bases, high-value-fields.json and field-frequency-stats.json, are built offline from the public Azure/Azure-Sentinel repository (Solutions/, Detections/, Hunting Queries/, roughly 3,800 YAML rule files). Each query is run through the same Get-TablesFromKql and Get-FieldsFromKql the module uses at runtime to build per-table field frequency counts, from which three tiers of fallback fields are derived:

  • Universal fields: fields appearing in more than 50% of all tables (for example TimeGenerated)
  • Category defaults: fields appearing in more than 40% of tables within a classification category
  • Per-table stats: raw field frequency counts for tables with at least 3 referencing rules

Mined fields are merged into the curated high-value-fields.json (curated entries are kept, newly discovered tables with at least 3 rules and 3 meaningful fields are added).

At runtime, Get-SplitKql uses a fallback hierarchy: curated KB entry -> live rule/hunting field analysis -> community per-table stats -> category defaults -> universal fields. Frequency of fields is not a perfect method, but it's useful to know.

Tests

475 Pester v5 tests, no Azure connectivity required. Run them from a plain PowerShell session rather than the VS Code integrated terminal:

Invoke-Pester ./Tests/LogHorizon.Tests.ps1 -Output Detailed

License

GPL-3.0. See LICENSE.

Version history

See CHANGELOG.md.

Known issues

PwshSpectreConsole UTF-8 encoding warning

To enable UTF-8 output in your terminal, add the following line at the top of your PowerShell $PROFILE file and restart the terminal:

$OutputEncoding = [console]::InputEncoding = [console]::OutputEncoding = [System.Text.UTF8Encoding]::new()

The module sets this automatically on import, but depending on your session the warning may still appear. It's cosmetic and doesn't affect functionality.

Contributing

If you have issues or want to contribute, create a PR.

Like the tool?


Buy Me a Coffee at ko-fi.com