Desktop companion for thermal and acoustic hardware checks. It walks the lab SOP, launches the existing stress-scripts suite, stores each pass as a named configuration, and compares configs side by side.
It does not reimplement stressing. The engine is a local checkout of stress-scripts.
- On launch, scan this machine (CPU, GPU, RAM, storage, fans, chassis) and prefill a configuration. CPU cooler is entered by hand. PSU and serial are filled only when the system exposes them.
- Start either a thermal session or an acoustic session. They are separate passes on the same kind of configuration.
- Thermal: warm-up 5–10 minutes with
s76-stress-tests.sh -l(skip LLVM), then a 3-minute cooldown and a 10-minute run. Capture CPU and GPU tap from the test_gui tabs (optional photos). Repeat 2–3 times. - Acoustic: confirm mic placement (2 ft from the CPU side, center height and width, quiet space), record idle dB, then start the suite and record stressed dB.
- Compare two or more sessions of the same type. Thermal compare shows taps. Acoustic compare shows idle and stressed dB. Ambient mismatch is flagged.
Sessions are saved under ~/.local/share/thermal-lab/ so you can resume after a reboot.
- Linux with Python 3.10+
- System Tk (
sudo apt install python3-tk) — required by the desktop UI - The stress suite’s own dependencies (
s76-stress-tests.shstarts test_gui, stress-ng, and on NVIDIA gpu_burn)
./install.sh
./run.shinstall.sh clones Thermal Lab if needed, installs missing packages, and downloads the stress test tools. The app uses those tools when a test starts. There is no folder to configure.
The app starts s76-stress-tests.sh -l for warmup and each thermal run, then stops the process tree when the timer ends. The suite itself wants to run for hours; the timer is what ends a 10-minute pass.
On NVIDIA, that exact command also starts gpu_burn. It is killed with everything else when the timer finishes.
| Step | Duration | Suite |
|---|---|---|
| Warm-up | 5–10 min (default 7) | s76-stress-tests.sh -l |
| Cooldown | 3 min | stopped |
| Thermal run | 10 min | s76-stress-tests.sh -l |
| Runs per session | 2 or 3 |
“Shut off” can mean stop the suite or power the machine down. State is saved after every step.