Skip to content

About

A Grbl_ESP32CNC Controller for MPCNC

Resources

Stars

95 stars

Watchers

14 watching

Forks

Latest commit

 

History

28 Commits

Folders and files

NameName
Last commit message
Last commit date
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

MPCNC Grbl_ESP32 Controller

MPCNC Controller Image

This is a CNC controller specially designed to address the needs of the MPCNC (Mostly Printed CNC) CNC Router.

Features

  • ESP32 Microcontroller:
    • Very Fast: Dual core 32 bit, 240 MHz
    • Large Flash Memory
    • Wifi:
    • Bluetooth:
  • Grbl_ESP32 Firmware:
    • Compatible with most existing Grbl gcode sender software.
    • Web User Interface
    • Multiple Interfaces
      • USB Serial:
      • Web User Interface:
      • Telnet:
      • Bluetooth:
      • SD Card:
  • (5) Stepper Motor Drivers: On for each motor in the MPCNC design. Motors are ganging in firmware and have an auto squaring feature executed during homing.
  • Limit Switch Connectors:
  • Control Pins:
  • Spindle Control:
  • Fan Power:
  • Micro SD card:

Getting One

They are available at the following links or you can source it yourself.

Usage Instructions

See the wiki

License

Creative Commons Attribution - ShareAlike 4.0 International

There are no commercial restrictions on using this design, but you must attribute the design to Bart Dring or @buildlog. You must also publish any changes or improvements to the design with the same open source license.

Version History

  • Version 1.1 Original upload
  • Version 1.2
    • Removed R/C filters on limit switches. This was not working for everyone. A firmware debouncing feature was added.
    • Made GPIO2 and output. Some dev modules have trouble with this as an input. Shuffled a few pins to accomodate this change.
  • Version 1.2.1
    • Changed orientation of relay for better layout
    • Removed pull down resistor on spindle PWM circuit (it was never installed previously)
    • Note: This uses the same cpu_map ans V1.2

Source Files

Donation

This project requires a lot of work and often expensive items for testing. Please consider a safe, secure and highly appreciated donation via the PayPal link below.

About

A Grbl_ESP32CNC Controller for MPCNC

Resources

Stars

95 stars

Watchers

14 watching

Forks

Releases

Packages

Used by

Contributors

Languages