PC Componentes PcCom Revolt i7 4060, Intel Raptor Lake, Realtek ALC256: snd_hda_intel works, sof-firmware doesn't. #10532
Replies: 3 comments 1 reply
-
|
@Cliff-pop-os can you provide your kernel log. Audio is either DSP or non DSP configured depending on your HW SKU. It sounds like based on your description that your device in non DSP and uses legacy HDA audio only. |
Beta Was this translation helpful? Give feedback.
-
|
Hello @lgirdwood, thank you for your response. I'm not a Linux expert, so please bear with me if I don't get something right straight away. I created the persistent system log via ‘cat /var/log/kern.log > kernel.log’ and uploaded it here as an attachment: Is that what you asked for? Best regards. |
Beta Was this translation helpful? Give feedback.
-
|
So far I can tell you have a DSP and its loading FW and topology. You also have NV display driver for display audio. But I see several logs from different boots that look different so I assume you have been changing BIOS settings ? Log above was missing HDA codec enumeration, whilst log below with HDA looks to be missing DSP. To me this looks like BIOS incorrectly disabling HDA codec when DSP is enabled, but pls confirm. If so, I'd recommend disabling DSP and using HDA mode only. |
Beta Was this translation helpful? Give feedback.
Uh oh!
There was an error while loading. Please reload this page.
-
Hello everyone,
after months of practically coming out of nowhere, I've been having problems with the sound (dummy output) on my laptop (PC Componentes PcCom Revolt i7 4060, Intel Raptor Lake, Realtek ALC256, ALSA info --with-all here: https://alsa-project.org/db/?f=a5413ef163e5fa96f4b8c23cf9cef82832f65365), I finally managed, after intensive research, to get reliable sound from the audio jack again with the kernel module snd_hda_intel.
What steps helped in my case (just for the record):
Now my question as a simple Linux user:
Is it possible (and sensible) to control the analog sound for the system described above via sof-firmware, and if so, where can I get the necessary information (e.g., sof-firmware configuration options, Alsa modprobe options, topology & topology files if needed)?
I was hoping that I could derive the information directly from the ALSA information linked above, but if that is possible, I could use some help, as I have not yet found any useful information on the Internet about the reliable operation of sof-firmware on my laptop model.
HTH and many thanks for your interest.
Beta Was this translation helpful? Give feedback.
All reactions