Skip to content

info.md

Latest commit

 

History

History
96 lines (70 loc) · 3.24 KB

info.md

File metadata and controls

96 lines (70 loc) · 3.24 KB

hacs_badge

Features:

Powerlink2 create sensor and binary_sensor to interact with a visonic alarm using the mqtt protocol

This component interfaces with the API server powerlink2 for a visonic alarm.

This component will create one alarm_control_panel that let you show the current state of the alarm system and also to arm and disarm the system. It will also create one sensor for every door/window contact that let you see if the doors or windows are open or closed. It uses mqqt to communicate with HA.

Requirements

The component has only been tested with a Visonic PowerMaxPro with a PowerLink 2 ethernet module, so it might not work with (but should) other Visonic alarm systems. The HomeAssistant version is the latest Home Assistant 2022.11.4. The component has been used flawlessly for several months.

This is unsupported by Visonic - they don't publish their REST API. It is also unsupported by me. I accept no liability for your use of the component or library, nor for any loss or damage resulting from security breaches at your property.

If you don't use a powerlink ethernet module, have a look at the Integration for the Visonic Powermax and Powermaster Alarm Systems by davesmeghead:

Configuration:

  • Add to configuration.yaml:
alarm_control_panel:
  - platform: mqtt
    state_topic: homeassistant/alarm
    command_topic: homeassistant/alarm/set
    payload_disarm: Disarm
    payload_arm_home: ArmHome
    payload_arm_away: ArmAway
    name: Alarme Visonic
  • Add to the sensors.yaml file (in the configuration.yaml I use sensor: !include sensors.yaml) insert the configuration of the powerlink2 sensor as
  - platform: powerlink2
    state_topic: homeassistant/alarm
    command_topic: homeassistant/alarm/set
    sensor_topic: homeassistant/alarm/sensor
    sensor_battery_topic: homeassistant/alarm/sensorbattery
    host: !secret alarm_host
    scan_interval: 1
    ignore_first_cmd: True
    alarm_user: !secret alarm_user
    alarm_password: !secret alarm_password
    powerlink_lang: FR
  • Add to the mqtt.yaml file (in the configuration.yaml I use mqtt: !include mqtt.yaml) insert the mqtt sensors you want to use
# mqtt sensor
  sensor:
    - name: HAstatus 
      state_topic: "homeassistant/status"
    - name: Alarme
      state_topic: "homeassistant/alarm"
    - name: AlarmSensor 
      state_topic: "homeassistant/alarm/sensor"
# mqtt binary_sensor
  binary_sensor:
    - name: Alarme_PL
      state_topic: "homeassistant/alarm"
      payload_on: "armed_away"
      payload_off: "disarmed" 
      device_class: power 
    - name: cuisine_PL
      state_topic: "homeassistant/alarm/sensor5"
      payload_on: "Ouv."
      payload_off: "Ok"
      device_class: door
    - name: salon_PL
      state_topic: "homeassistant/alarm/sensor6"
      payload_on: "Ouv."
      payload_off: "Ok"
      device_class: door

The following image show an example of the visonic2 interface on home-assistant

HA_visonic2.png