Some Issues NanoPi-R6C image (usb3 and leds)

[janneman001]

Thanks for the downloadable trixie images for the NanoPi-6C. I installed it on the NanoPi-R6C 8GB / 32GB emmc. I have the trixie 13.1 flashed in emmc right now.

It works fine except for 2 differences with the manufacturer debian12 image.

1. the leds in the "frontpanel" only the red one blinks. The other leds do not function the same way as with the Friendly Elec debian12 image.

In the manufacturer debian 12 image:

• The first, red one, only blinks when it is booting and after that lights up steady.
• The two middle green ones are signalling the networkports that are up.
• The fourth is user configurable in the friendly elec image.

2. the usb3 port is not working. Also the corresponding hub is not showing up with lsusb.
   in the manufacturer image this port showed as a separate 3.0 hub.

I now use the upper port that is usb2.0. HDD speed is limited by that.

regards,
Jan

[janneman001]

Today i tried the 13.2 image. Still no usb3.

In the bookworm image mentioned on this page: https://wiki.friendlyelec.com/wiki/index.php/NanoPi_R6C#Get_Started
the usb3 works. I tested it. Device code: 1d6b:0003

Also a lot faster with the same HDD

[janneman001]

Today i installed "forky". Here the usb3 hub is available.