[feature request] support for the lilygo t-display P4

[D-Melhede]

Please add support for the new Lilygo T-Display P4.
For me the EU Amoled version would be nice.

[bmorcelli]

I have both versions here..

need to work with them ☺️

[pelgraine]

Please add support for the new Lilygo T-Display P4.
For me the EU Amoled version would be nice.

While we wait for the Launcher update, you can now run Meck and or Wadamesh and or MCore and or Meshtastic on the P4 (pick the two you like most!)

https://github.com/pelgraine/Meck-P4/releases/tag/dualmesh-v1

[bmorcelli]

Can't get Wifi to work.. my C6 came without firmware, it doesn't work, and I don't have the any cable with that tiny connector to flash taht thing 😭

[bmorcelli]

Available for testing on Beta..

Important notes:

• Mass Storage (USB) uses the USB-C of the Center
• Keyboard is is working, but it must be plugged in before start
• I couldn't flash the ESP32-C6 yet, so IDK if it is working.. but if you have a valid firmware there, please Test "WUI" in both AP mode and in your network
• There's no firmware on OTA yet, so it might fail..
• If it fails to communicate with the hosted device, you will see an Option on CFG to retry the communication.. it is done at boot time and save a skip flag, because when it fails the device reboots in 20s.. so if it fails to communicate within 8s, it saves the flag, reboot and will only try again if this flag is reset.. too much time to test, and

[D-Melhede]

This is great news.
Have any Meshcore FW been verified to boot with Launcher on T-Displah P4 ? Do we need a non-merged bin file ?

[bmorcelli]

I don't have their binaries

merged is better, as it contains metadata of the partition table

But if you don't have it, use the version that saves info on SD Card and its good to go.

[D-Melhede]

Not request for files, just if you know of some fw which is ready, then I will know where to find it 👌

[D-Melhede]

I tried 2 different, and both say:
"App: No error", and then "Update Error"
But probably they need to prepare for Launcher...

[bmorcelli]

Pack them into a zip file and add into this issue, so I can test it too..

Have WUI worked?

[D-Melhede]

WUI says:
ESP-Hosted unavailable: no WiFi

[bmorcelli]

meshcore.zip.zip
meshcore amoled.zip

These are from meshcore webflasher.. it has an option to download the binaries

[D-Melhede]

I have tested both standalone on T-Display P4, and they work without Launcher:

Meck-P4:
https://github.com/pelgraine/Meck-P4/releases/tag/0.7.1

Wadamesh:
https://github.com/bmorcelli/Launcher/releases/download/beta/Launcher-lilygo-t-display-p4-amoled.bin

[D-Melhede]

How did you find the T-Display P4 on Meshcore.io ? I don't see it...