seedbox-setup-beta

#!/bin/sh
# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is IRC Auto Downloader
#
# The Initial Developer of the Original Code is
# David Nilsson.
# Portions created by the Initial Developer are Copyright (C) 2010, 2011
# the Initial Developer. All Rights Reserved.
#
# Contributor(s):
#
# ***** END LICENSE BLOCK *****

apt-get update

WEBMIN_URL="https://sourceforge.net/projects/webadmin/files/webmin/2.510/webmin-2.510.tar.gz/download"

RUTORRENT_TRUNK_DIR="https://github.com/Novik/ruTorrent.git"

# The official tarballs are tried if git fails.
RUTORRENT_VERSION="5.2.10"
RUTORRENT_CORE_NAME="v$RUTORRENT_VERSION.tar.gz"
RUTORRENT_CORE_URL="https://github.com/Novik/ruTorrent/archive/$RUTORRENT_CORE_NAME"

RUTORRENT_PLUGINS=

# These are the ruTorrent plugins that will get installed. To remove one, either
# remove the whole line or comment it (prepend a '#' to the start of the line).
# If the line starts with '#', the plugin is not installed.
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS _getdir"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS _noty2"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS _task"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS autotools"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS check_port"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS chunks"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS cookies"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS cpuload"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS create"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS data"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS datadir"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS diskspace"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS edit"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS erasedata"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS extratio"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS extsearch"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS feeds"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS filedrop"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS geoip"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS history"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS httprpc"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS ipad"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS loginmgr"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS lookat"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS mediainfo"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS ratio"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS retrackers"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS rss"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS rssurlrewrite"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS rutracker_check"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS scheduler"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS screenshots"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS seedingtime"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS show_peers_like_wtorrent"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS source"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS theme"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS throttle"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS tracklabels"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS trafic"
RUTORRENT_PLUGINS="$RUTORRENT_PLUGINS unpack"


# For building rtorrent
LIBCURL_NAME="curl-8.16.0"
LIBCURL_URL="http://curl.haxx.se/download/$LIBCURL_NAME.tar.gz"
SIGCPP20_URL="https://github.com/libsigcplusplus/libsigcplusplus/archive/refs/tags/3.6.0.tar.gz"
TINYXML2_VERSION="11.0.0"
LIBTORRENT_VERSION="0.16.0"
RTORRENT_VERSION="0.16.0"
TINYXML2_NAME="tinyxml2-$TINYXML2_VERSION"
TINYXML2_URL="https://github.com/leethomason/tinyxml2/archive/refs/tags/$TINYXML2_VERSION.tar.gz"
LIBTORRENT_NAME="libtorrent-$LIBTORRENT_VERSION"
LIBTORRENT_URL="https://github.com/rakshasa/rtorrent/releases/download/v$RTORRENT_VERSION/$LIBTORRENT_NAME.tar.gz"
RTORRENT_NAME="rtorrent-$RTORRENT_VERSION"
RTORRENT_URL="https://github.com/rakshasa/rtorrent/releases/download/v$RTORRENT_VERSION/$RTORRENT_NAME.tar.gz"

HTPASSWD_PY_SCRIPT_URL="http://trac.edgewall.org/export/10433/trunk/contrib/htpasswd.py"
HTPASSWD_PY_SCRIPT_URL2="http://sourceforge.net/projects/autodl-irssi/files/inst-files/htpasswd.py/download"

NGINX_NAME="nginx-1.29.1"
NGINX_URL="http://nginx.org/download/$NGINX_NAME.tar.gz"

MOD_SCGI_VERSION="2.2"
MOD_SCGI_URL="http://python.ca/scgi/releases/scgi-$MOD_SCGI_VERSION.tar.gz"

UNRAR_VERSION="7.1.10"
UNRAR_URL="https://ftp.osuosl.org/pub/blfs/conglomeration/unrarsrc/unrarsrc-$UNRAR_VERSION.tar.gz"

# Dirs relative to user's home directory
RTORRENT_REL_DOWNLOAD_DIR="downloads"
RTORRENT_REL_WATCH_DIR="rtorrent/watch"
RTORRENT_REL_SESSION_DIR="rtorrent/session"

REQUIRED_PHP_MODULES="json xml sockets"

# Start port. When we need a new port number, this port is incremented by one.
CURRENT_PORT=23875
DEFAULT_PORT_FTP=21
DEFAULT_PORT_FTPES=990
DEFAULT_UMASK=022
RPC_PREFIX=RPC

LSB_DEFAULT_START="2 3 4 5"
LSB_DEFAULT_STOP="0 1 6"

# Setting these to anything other than 80 and 443 may not work with Apache (since the
# code assumed it would always be 80 and 443).
HTTP_PORT=80
HTTPS_PORT=443

SCGI_HOST="127.0.0.1"

INTERACTIVE=n
REINSTALL_RUTORRENT_PLUGIN=n
RUTORRENT_PASSWORD_PROTECTED=n
USERS=
RUTORRENT_BASE_PATH=
INSTALL_STARTUP_SCRIPT=n
BUILD_RTORRENT=n
INSTALL_WEB_SERVER=
INSTALL_RUTORRENT=n
INSTALL_VSFTPD=n
FTP_PORT=
USE_ENCRYPTED_FTP=n
INSTALL_WEBMIN=n
USER_TIMEZONE=

RUTORRENT_SITE_REALM="My ruTorrent web site"
PHPCGI_STARTUP_DESC="Start php-cgi"
NGINX_STARTUP_DESC="Start nginx"

PATH="$PATH:/usr/local/bin"

# Find an echo that supports -e
echo=echo
for cmd in echo /bin/echo; do
	$cmd >/dev/null 2>&1 || continue
	if ! $cmd -e "" | grep -qE '^-e'; then
		echo=$cmd
		break
	fi
done

CSI=$($echo -e "\033[")
CEND="${CSI}0m"
CDGREEN="${CSI}32m"
CRED="${CSI}1;31m"
CGREEN="${CSI}1;32m"
CYELLOW="${CSI}1;33m"
CBLUE="${CSI}1;34m"
CMAGENTA="${CSI}1;35m"
CCYAN="${CSI}1;36m"
CQUESTION="$CMAGENTA"
CWARNING="$CRED"
CMSG="$CCYAN"

errorExit() {
	cat << EOF
$CWARNING
***ERROR***
$*
***ERROR***
$CEND
Help channel: ${CGREEN}#autodl-community@irc.p2p-network.net$CEND
EOF
	exit 1
}

exitHelp() {
	cat << EOF

ruTorrent plugin installer

    sh $0 [options]

Options:

--rtorrent
    Will build and install rtorrent, libtorrent and TinyXML-2 from source code.

--rtorrent-noexec-patch
    Patch rtorrent to disallow remote users from executing code.

--nginx
    Install nginx web server.

--rutorrent
    Install ruTorrent. Requires a web server, eg. --nginx.

--vsftpd
    Install vsftpd.

--ftpes
    Use encrypted FTP (FTPES).

--ftp-port <port>
    FTP server port.

--webmin
    Install Webmin.

-u user:webUser:webPass
--user user:webUser:webPass
    The $(uname -s) user, ruTorrent user, ruTorrent password.
    You can use more than one -u option.

-w
--password-protected
    Use this option if ruTorrent is password protected. It's required if you
    want to use more than one ruTorrent user. Not needed if you install
    ruTorrent.

-r PATH
--rutorrent-base-path PATH
    Path to ruTorrent, eg. /var/www/rutorrent. Not needed if you install
    ruTorrent.

-s
--install-startup-script
    Install a startup script (service) which will start rtorrent when
    the computer boots.

-h
--help
    Show this help text

Examples (as root user):

  sh $0 --rtorrent --nginx --rutorrent --vsftpd --ftpes --webmin -s -u user1::user1:pass1 -u user2::user2:pass2

Installs rtorrent, nginx, ruTorrent, vsftpd (encrypted), Webmin, and installs a service (starting rtorrent)
 for both users.

  sh $0 --rtorrent -u user1 -u user2 -u user3 -u user4 -s

Installs rtorrent  and the startup script.
EOF
	exit 1
}

parseCommandLine() {
	while [ $# -gt 0 ]; do
		local arg="$1"
		shift

		if [ "$arg" = "-u" ] || [ "$arg" = "--user" ]; then
			USERS="$USERS $1"
			shift
		elif [ "$arg" = "-w" ] || [ "$arg" = "--password-protected" ]; then
			RUTORRENT_PASSWORD_PROTECTED=y
		elif [ "$arg" = "-r" ] || [ "$arg" = "--rutorrent-base-path" ]; then
			RUTORRENT_BASE_PATH="$1"
			shift
		elif [ "$arg" = "-s" ] || [ "$arg" = "--install-startup-script" ]; then
			INSTALL_STARTUP_SCRIPT=y
		elif [ "$arg" = "--rtorrent" ]; then
			BUILD_RTORRENT=y
		elif [ "$arg" = "--nginx" ]; then
			INSTALL_WEB_SERVER=nginx
		elif [ "$arg" = "--rutorrent" ]; then
			INSTALL_RUTORRENT=y
		elif [ "$arg" = "--vsftpd" ]; then
			INSTALL_VSFTPD=y
		elif [ "$arg" = "--ftpes" ]; then
			USE_ENCRYPTED_FTP=y
		elif [ "$arg" = "--ftp-port" ]; then
			FTP_PORT="$1"
			shift
		elif [ "$arg" = "--webmin" ]; then
			INSTALL_WEBMIN=y
		else
			exitHelp
		fi
	done
}

# Sets os and os_long to the OS type and OS name respectively
detectOs() {
	local DISTRIB_ID=
	local DISTRIB_DESCRIPTION=
	if [ -f /etc/lsb-release ]; then
		. /etc/lsb-release
	fi

	# Must be before a whole bunch of other OS tests
	if [ "$DISTRIB_ID" = "Ubuntu" ]; then
		os=debian
		os_long="$DISTRIB_DESCRIPTION"
	# Must be before Debian
	elif [ -f /etc/debian_version ]; then
		os=debian
		local prefix=
		if ! uname -s | grep -q GNU; then
			prefix="GNU/"
		fi
		os_long="Debian $prefix$(uname -s) $(cat /etc/debian_version)"
	else
         echo -e "\e[1;31mYour OS is not detected as an OS supported by this script. This script only supports \e[5;32mDebian and Fedora\e[0m \e[1;31mbased OSes.\e[0m"
         exit 1

	fi

	os_long="${os_long:-$(uname -s)}"
}

# In-place editing like sed -i but more portable...
sed_i() {
	local cmd="$1"
	local file="$2"
	isProgramInstalled ed || errorExit "ed is not installed!"
	local addr=","
	echo "$cmd" | grep -qE '^/' && addr=
	ed -s "$file" > /dev/null 2>&1 << EOF
$addr$cmd
w
q
EOF
}

getFirst() {
	echo $1
}

# Returns true if $1 is one of $2..$n
arrayIsPresent() {
	local val="$1"
	shift
	for v in "$@"; do
		[ "$v" = "$val" ] && return 0
	done
	return 1
}

canGeneratePasswords() {
	[ -c /dev/urandom ]
}

generatePassword() {
	newPassword=$(cat /dev/urandom | tr -dc _A-Z-a-z-0-9 | head -c17)
}

isProgramInstalled() {
	which "$1" > /dev/null 2>&1 && return 0
	return 1
}

isPerlModuleInstalled() {
	perl -M$1 -e '' > /dev/null 2>&1 && return 0
	return 1
}

# Add $1 or $2 if it exists, to PACKAGES if program $1 isn't present
addProgram() {
	isProgramInstalled $1 || PACKAGES="$PACKAGES ${2:-$1}"
}

# Add $2 to PACKAGES if perl module $1 isn't present
addPerlModule() {
	isPerlModuleInstalled $1 || PACKAGES="$PACKAGES $2"
}

installPackages() {
	[ -z "$INSTALL" ] && return
	[ -z "$PACKAGES" ] && return
	$INSTALL $PACKAGES
	PACKAGES=
}

installPerlModule() {
	isPerlModuleInstalled $1 || $INSTALL $2
}

installProgram() {
	isProgramInstalled $1 || $INSTALL ${2:-$1}
}

installBuildTools() {
	[ "$BUILD_TOOLS_INSTALLED" = y ] && return
	PACKAGES="$BUILD_TOOLS"
	installPackages
	BUILD_TOOLS_INSTALLED=y
}

# Detects missing Perl modules and stores them in MISSING_PERL_MODULES
detectMissingPerlModules() {
	OLD_PERL_MODULES=
	MISSING_PERL_MODULES=
	for module in $REQUIRED_PERL_MODULES; do
		isPerlModuleInstalled $module || MISSING_PERL_MODULES="$MISSING_PERL_MODULES $module"
	done

	# Make sure the JSON module is new
	if isPerlModuleInstalled JSON && ! perl -MJSON -e '&decode_json("{}")' > /dev/null 2>&1; then
		echo "${CWARNING}Old JSON module is installed. Need to install from CPAN.$CEND"
		MISSING_PERL_MODULES="$MISSING_PERL_MODULES JSON"
		OLD_PERL_MODULES="$OLD_PERL_MODULES JSON"
	fi

	if echo "$MISSING_PERL_MODULES" | grep -wq JSON; then
		MISSING_PERL_MODULES="JSON::XS $MISSING_PERL_MODULES"
	fi
	if echo "$MISSING_PERL_MODULES" | grep -q 'XML::LibXML'; then
		# Sometimes the cpan script doesn't install the required dependencies
		MISSING_PERL_MODULES="XML::NamespaceSupport XML::SAX $MISSING_PERL_MODULES"
	fi
}

# Detect where cpan is installed and place the path in the CPAN variable.
# PCLinuxOS/Mandriva append the version number...
detectCpanBin() {
	for file in $(which cpan 2> /dev/null) $(ls /usr/bin/cpan-* 2> /dev/null); do
		if [ -x "$file" ]; then
			CPAN="$file"
			return
		fi
	done
	isPerlModuleInstalled CPAN && return
	errorExit "Could not find the cpan script or the CPAN Perl module. Can't install missing Perl modules."
}

isValidTzName() {
	echo "$1" | LC_ALL=C grep -qE '^[A-Z][^/ ]*(/[A-Z][^/ ]*)?$' && return 0
	return 1
}

detectTimeZone() {
	[ -n "$USER_TIMEZONE" ] && return

	local hash=
	local hasher=
	local files=
	local zoneinfoPath=/usr/share/zoneinfo
	[ -d "$zoneinfoPath" ] || return
	if hasher=md5sum; isProgramInstalled $hasher || hasher=sha1sum; isProgramInstalled $hasher; then
		hash=$($hasher /etc/localtime | awk '{print $1}')
		files="$(find $zoneinfoPath -type f -print | xargs $hasher | grep -E "^$hash\\>" | awk '{print $2}')"
	elif hasher=md5; isProgramInstalled $hasher || hasher=sha1; isProgramInstalled $hasher; then
		hash=$($hasher /etc/localtime | sed -e 's/^.* = \([a-zA-Z0-9]*\)$/\1/')
		files="$(find $zoneinfoPath -type f -print | xargs $hasher | grep -E "$hash\$" | sed -e 's/^[^ ]* (\([^)]*\)).*/\1/')"
	else
		return
	fi

	# Detect all possible timezone names
	local timezones=
	for path in $files; do
		local tz="${path#$zoneinfoPath/}"
		while true; do
			isValidTzName "$tz" && break
			local newTz="${tz#*/}"
			[ "$newTz" = "$tz" ] && tz= && break
			tz="$newTz"
		done
		isValidTzName "$tz" && timezones="$timezones $tz"
	done

	# Now find the ones PHP likes...
	local okRegions="(Africa|America|Antarctica|Arctic|Asia|Atlantic|Australia|Europe|Indian|Pacific)"
	for tz in $timezones; do
		echo "$tz" | grep -qE "^$okRegions/" && USER_TIMEZONE="$tz" && return
	done

	# Return the first one we found
	for tz in $timezones; do
		USER_TIMEZONE="$tz"
		return
	done
}

getNumCpus() {
	[ -n "$NUMCPUS" ] && return
	[ -f /proc/cpuinfo ] && NUMCPUS=$(cat /proc/cpuinfo | grep '^processor' | wc -l) && return
	isProgramInstalled sysctl && sysctl -n hw.ncpu | grep -qE '^[1-9][0-9]*$' && NUMCPUS=$(sysctl -n hw.ncpu) && return
	NUMCPUS=1
}

# Appends $value to $varName in $file, creating the var if it doesn't exist. The
# value is not appended if it already exists.
appendFileStringVar() {
	local file="$1"
	local varName="$2"
	local value="$3"

	[ -f "$file" ] || errorExit "File '$file' does not exist"

	local varLine=$(grep -E "^$varName=" "$file" | tail -n1)
	if [ -z "$varLine" ]; then
		echo "$varName=\"$value\"" >> "$file"
	else
		echo "$varLine" | grep -qE "[='\" ]$value(\"|'| |$)" && return

		local q=
		echo "$varLine" | grep -qE "^$varName='" && q="'"
		echo "$varLine" | grep -qE "^$varName=\"" && q='"'
		sed_i "s#^\\($varName=\\)$q\\(.*\\)$q#\\1\"\\2 $value\"#" "$file"
	fi
}

# Set a variable in a script file to a new value. The variable is created if it does not exist
setScriptVariable() {
	local file="$1"
	local name=$2
	local value="$3"

	[ -f "$file" ] || errorExit "File does not exist: $file"

	local newLine="$name=\"$value\""
	if grep -qE "^$name=" $file; then
		sed_i "s!^$name=.*\$!$newLine!" "$file"
	else
		echo "$newLine" >> "$file"
	fi
}

userExists() {
	id -rg "$1" > /dev/null 2>&1 && return 0
	return 1
}

setSvnOpts() {
	SVN_OPTS=
	isProgramInstalled svn || return
	# svn sometimes gives an error message 'broken pipe'. Ignore it.
	if svn help co 2>/dev/null | grep -q 'non-interactive' && svn help co 2>/dev/null | grep -q 'trust-server-cert'; then
		SVN_OPTS="--non-interactive --trust-server-cert"
	fi
}

downloadFile() {
	local filename="$1"
	shift
	for url in "$@"; do
		for i in 1 2 3 4 5; do
			wget --no-check-certificate -O "$filename" "$url" && return 0
		done
	done
	return 1
}

buildMakeProgram() {
	local url="$1"
	local name="$2"
	local builddir="$3"
	local srcdir="$4"
	local makefile="${5:-Makefile}"

	buildStart
	echo "${CMSG}Downloading $name source code...$CEND"
	cd "$BUILD_DIR"
	local filename="${url##*/}"
	downloadFile "$filename" "$url" || errorExit "Could not download $name source code."
	tar xzf "$filename"
	srcdir="${srcdir:-${filename%.tar.gz}}"
	cd "$srcdir/$builddir"
	local make=${MAKE:-make}
	echo "${CMSG}Building $name...$CEND"
	$make -f $makefile all || errorExit "Could not build $name."
	$make -f $makefile install || errorExit "Could not install $name."
	echo "${CMSG}$name is now installed$CEND"
	buildEnd
}

buildProgram() {
	local prog="$1"

	echo "${CMSG}Building $prog...$CEND"

	./configure --prefix=$PREFIX $2 || echo "Could not configure $prog. Continuing anyway." #errorExit "Could not configure $prog. Try again, or try logging out and in and try again."

	getNumCpus
	local make=${MAKE:-make}
	local makeopts="-j$NUMCPUS"
	$make $makeopts || $make || errorExit "Could not build $prog"
	$make install || errorExit "Could not install $prog"

	local ldsoconf=/etc/ld.so.conf
	touch "$ldsoconf"
	grep -qE "^$PREFIX/lib$" $ldsoconf || echo "$PREFIX/lib" >> $ldsoconf
	ldconfig || errorExit "ldconfig failed"

	echo "${CMSG}$prog is now installed.$CEND"
}

downloadAndBuild() {
	local prog="$1"
	local urls="$2"
	local name="$3"
	local configOptions="$4"
	local patchUrl="$5"

	cd "$BUILD_DIR"
	echo "${CMSG}Downloading $prog source code...$CEND"
	downloadFile "$name.tar.gz" $urls || errorExit "Could not download $prog source code."
	tar xzf $name.tar.gz
	
	if echo "$patchUrl" | grep '^[a-z]*://'; then
		echo "${CMSG}Patching $prog...$CEND"
		PACKAGES="patch"
		installPackages
		isProgramInstalled patch || errorExit "patch is not installed!"
		downloadFile the.patch "$patchUrl" || errorExit "Could not download the patch file."
		patch -p1 -d $name < the.patch || errorExit "Could not patch $prog."
	elif [ -n "$patchUrl" ]; then
		echo "${CMSG}Patching $prog...$CEND"
		cd $name
		eval $patchUrl
		cd ..
	fi

	cd $name
	buildProgram "$prog" "$configOptions"
}

checkoutAndBuild() {
	local prog="$1"
	local url="$2"
	local configOptions="$3"
	cd "$BUILD_DIR"
	echo "${CMSG}Downloading $prog source code...$CEND"
	svn export $SVN_OPTS "$url" "$prog" || errorExit "Could not download $prog source code."
	cd "$prog"
	buildProgram "$prog" "$configOptions"
}

buildStart() {
	PREFIX=/usr/local
	OLD_PATH="$PATH"
	PATH="$PATH:$PREFIX/bin"
	PKG_CONFIG_PATH=$PREFIX/lib/pkgconfig
	export PKG_CONFIG_PATH
	BUILD_DIR="$(echo ~)/build-tmp"

	rm -rf "$BUILD_DIR"
	mkdir "$BUILD_DIR" || errorExit "Could not create build directory."
}

buildEnd() {
	cd
	rm -rf "$BUILD_DIR"

	[ -n "$OLD_PATH" ] && PATH="$OLD_PATH"
	unset OLD_PATH
	unset PKG_CONFIG_PATH
}

buildRtorrent() {
	installBuildTools
	osHandler_$os installRtorrentBuildTools
	isProgramInstalled pkg-config || errorExit "pkg-config is not installed."

	# Minimum version is 7.15.4 but I had problems with 7.15.5 on CentOS. Set
	# it to 7.18.0 (the version Ubuntu Server 8.04 is using).
	if ! pkg-config --atleast-version=7.18.0 libcurl; then
		downloadAndBuild "libcurl" "$LIBCURL_URL" "$LIBCURL_NAME" ""
		# Prevent 'Unknown keyword 'URL' in ....' error
		sed_i 's/^URL:/#URL:/' $PREFIX/lib/pkgconfig/libcurl.pc
	fi
	if ! pkg-config --exists sigc++-2.0; then
		downloadAndBuild "sigc++-2.0" "$SIGCPP20_URL" "$SIGCPP20_NAME" ""
	fi
	downloadAndBuild "tinyxml2" "$TINYXML2_URL" "$TINYXML2_NAME"
	downloadAndBuild "libtorrent" "$LIBTORRENT_URL" "$LIBTORRENT_NAME" "" patchLibtorrent
	downloadAndBuild "rtorrent" "$RTORRENT_URL" "$RTORRENT_NAME" "--with-xmlrpc-tinyxml2" ""
}

patchLibtorrent() {
	# For gcc 4.6.0
	ed -s "src/torrent/data/block_transfer.h" > /dev/null 2>&1 << EOF
/#define LIBTORRENT_BLOCK_TRANSFER_H
a
#include <stddef.h>
.
w
q
EOF
	ed -s "src/data/memory_chunk.cc" > /dev/null 2>&1 << EOF
/#include "config.h"
a
#include <stddef.h>
.
w
q
EOF
}

installRtorrent() {
	buildStart
	buildRtorrent
	buildEnd
}

installModScgi() {
	local modScgiFile="$1"
	local modulesPath="$2"
	[ -f "$modScgiFile" ] && errorExit "mod_scgi file already exists."
	[ -d "$modulesPath" ] || errorExit "Apache modules path '$modulesPath' does not exist."

	buildMakeProgram "$MOD_SCGI_URL" "mod_scgi" "apache2"
	echo "LoadModule scgi_module $modulesPath/mod_scgi.so" > $modScgiFile
}

isPortUsed() {
	local port="$1"
	netstat -an | grep tcp | grep -w LISTEN | grep -qE "[.:]$port[ 	]" && return 0
	return 1
}

isValidIpAddress() {
	# It's not 100% accurate ... ;)
	echo $1 | grep -qE '^[0-9][0-9]?[0-9]?\.[0-9][0-9]?[0-9]?\.[0-9][0-9]?[0-9]?\.[0-9][0-9]?[0-9]?$'
}

getIpAddress() {
	isValidIpAddress "$OUR_IP_ADDRESS" && return
	echo "${CMSG}Detecting your IP address...$CEND"
	isValidIpAddress "$OUR_IP_ADDRESS" || OUR_IP_ADDRESS=$(curl http://icanhazip.com/)
	isValidIpAddress "$OUR_IP_ADDRESS" || OUR_IP_ADDRESS=$(hostname -I | awk '{print $1}')
	isValidIpAddress "$OUR_IP_ADDRESS" || OUR_IP_ADDRESS=$(ifconfig -a | grep "inet addr" | head -n1 | awk -F: '{print $2}' | awk '{print $1}')
	isValidIpAddress "$OUR_IP_ADDRESS" || OUR_IP_ADDRESS=$(ifconfig -a | grep "inet" | head -n1 | awk '{print $2}')
	isValidIpAddress "$OUR_IP_ADDRESS" || OUR_IP_ADDRESS="1.2.3.4"
}

getNewPortNumber() {
	while true; do
		newPortNumber=$CURRENT_PORT
		CURRENT_PORT=$(expr $CURRENT_PORT + 1)
		isValidPortNumber $newPortNumber || errorExit "Invalid port number. Change CURRENT_PORT."
		isPortUsed $newPortNumber || break
		echo "${CWARNING}Port $newPortNumber is in use, trying next port...$CEND"
	done
}

# Returns true if it's a valid ruTorrent base path
isValidRutorrentBasePath() {
	[ -n "$1" ] && [ -d "$1/conf" ]
}

isValidPassword() {
	echo "$1" | grep -qE "^ " && return 1
	echo "$1" | grep -qE " \$" && return 1
	echo "$1" | grep -qE '^$' && return 1
	echo "$1" | grep -q ':' && return 1
	echo "'$1'" | grep -q ' ' && return 1
	return 0
}

isValidPortNumber() {
	echo "$1" | grep -qiE '^[0-9]+$' || return 1
	echo "$1" | grep -qiE '[0-9][0-9][0-9][0-9][0-9][0-9]' && return 1
	[ $1 -ge 1024 ] && [ $1 -le 65535 ]
}

isValidWebUser() {
	[ -z "$1" ] && return 1
	echo "$1" | LC_ALL=C grep -qE '[A-Z:]' && return 1
	return 0
}

initUsers() {
	local users=
	for packedUser in $USERS; do
		extractPackedUser $packedUser

		if [ -z "$scgiPort" ]; then
			getNewPortNumber
			scgiPort=$newPortNumber
		fi
		if [ -z "$rtorrentPort" ]; then
			getNewPortNumber
			rtorrentPort=$newPortNumber
		fi

		users="$users $osUser:$webUser:$webPass:$scgiPort:$rtorrentPort"
	done
	USERS="$users"
}

extractPackedUser() {
	local packedUser="$1"

	osUser="$(echo $packedUser | cut -d: -f1)"
	webUser="$(echo $packedUser | cut -d: -f2)"
	webPass="$(echo $packedUser | cut -d: -f3)"
	scgiPort="$(echo $packedUser | cut -d: -f4)"
	rtorrentPort="$(echo $packedUser | cut -d: -f5)"
}

getUserGroup() {
	local user="$1"

	userExists "$user" || errorExit "The user '$user' does not exist."
	group=$(grep -w $(id -rg $user) /etc/group | cut -d: -f1)
	[ -z "$group" ] && group="$user"
}

getUserDir() {
	local user="$1"

	[ -z "$user" ] && errorExit "Invalid user (blank)."
	userDir="$(eval echo ~$user)"
	[ -d "$userDir" ] || errorExit "User $user's home directory does not exist."
}

resetOwner() {
	local user="$1"
	shift

	if [ "$ISROOT" = y ]; then
		getUserGroup "$user"
		chown -R $user:$group "$@"
	fi
}

# Updates MISSING_PHP_MODULES with all missing required PHP modules
detectMissingPhpModules() {
	MISSING_PHP_MODULES=
	local php=${WWW_PHP_CGI:-php}
	for module in $REQUIRED_PHP_MODULES; do
		$php -m 2> /dev/null | grep -wq $module || MISSING_PHP_MODULES="$MISSING_PHP_MODULES $module"
	done
}

installMissingPhpPackages() {
	PACKAGES=
	for module in $MISSING_PHP_MODULES; do
		PACKAGES="$PACKAGES php-$module"
	done
	installPackages
}

enablePhpIniModules() {
	local phpIni="$1"
	shift
	for module in "$@"; do
		grep -qE "^extension=$module.so" "$phpIni" && continue
		sed_i "s/^; *\\(extension=$module.so.*\\)/\\1/" "$phpIni"
		grep -qE "^extension=$module.so" "$phpIni" && continue
		echo "extension=$module.so" >> "$phpIni"
	done
}

installMissingPhpModules() {
	detectMissingPhpModules
	[ -z "$MISSING_PHP_MODULES" ] && return

	osHandler_$os installPhpModules

	detectMissingPhpModules
	[ -z "$MISSING_PHP_MODULES" ] && return
	cat << EOF
$CWARNING
The following PHP modules appear to be missing:
	$MISSING_PHP_MODULES
If the a ruTorrent plugin isn't working, you now know why. Install
them using your package manager or enable them in your php.ini file, and
restart your web server.$CEND
EOF
}


addLogrotateConfig() {
	local serviceName="$1"
	local logFiles="$2"
	local postrotateScript="$3"

	local logrotate_d=/etc/logrotate.d
	[ -d "$logrotate_d" ] || errorExit "Missing logrotate dir: $logrotate_d"

	cat > "$logrotate_d/$serviceName" << EOF
$logFiles {
	missingok
	daily
	rotate 14
	notifempty
	compress
	delaycompress
	sharedscripts
	postrotate
		$postrotateScript
	endscript
}
EOF
	[ $? -eq 0 ] || errorExit "Could not write logrotate file $logrotate_d/$serviceName"
}

detectPhpCgi() {
	WWW_PHP_CGI=${WWW_PHP_CGI:-$(which php-cgi | head -n1)}
	[ -x "$WWW_PHP_CGI" ] || errorExit "Could not find php-cgi"
	"$WWW_PHP_CGI" -v | grep -q 'cgi-fcgi' || errorExit "$WWW_PHP_CGI does not support FastCGI"
}

# $i is the i'th user number
getUserRpcMount() {
	local i=$1
	verifyWebServerVars
	# Make sure /RPC10 accesses aren't going to /RPC1 by padding with zeros. This is
	# easier than making sure every web server handles it correctly. Eg., lighttpd's
	# scgi.server table is read in order, so if you add /RPC1 before /RPC10, then
	# /RPC10 accesses will go to /RPC1. A fix would of course be to place /RPC10
	# before /RPC1 but it's easy to forget. Now we use /RPC00001 .. /RPC99999
	echo "/$RPC_PREFIX$(printf '%05d' $i)"
}

createSelfSignedCertFile() {
	local pemfile="$1"

	if [ ! -f "$OTHER_PEM_FILE" ]; then
		echo "${CMSG}Creating the self-signed certificate.$CEND"
		rm -f "$pemfile"
		openssl req -new -newkey rsa:2048 -days 1000 -nodes -x509 -keyout "$pemfile" -out "$pemfile" -batch \
			|| errorExit "Failed to create self-signed certificate."
		OTHER_PEM_FILE="$pemfile"
		CREATED_CERT_FILE=y
	else
		rm -f "$pemfile"
		cp "$OTHER_PEM_FILE" "$pemfile" || errorExit "Failed to copy self-signed certificate."
	fi

	chmod 0600 "$pemfile"
}

detectHtpasswd() {
	[ -z "$htpasswd" ] && isProgramInstalled htpasswd && htpasswd=htpasswd
	[ -z "$htpasswd" ] && isProgramInstalled htpasswd2 && htpasswd=htpasswd2
	if [ -z "$htpasswd" ]; then
		installProgram python
		if isProgramInstalled python; then
			cd
			downloadFile "htpasswd.py" "$HTPASSWD_PY_SCRIPT_URL" "$HTPASSWD_PY_SCRIPT_URL2" \
				&& htpasswd="python $(pwd)/htpasswd.py"
		fi
	fi
	[ -z "$htpasswd" ] && errorExit "Could not find htpasswd"
}

verifyWebServerVars() {
	[ -z "$WWW_PEMFILE" ] && errorExit "You have not initialized WWW_PEMFILE"
	[ -z "$WWW_PASSWORD_FILE" ] && errorExit "You have not initialized WWW_PASSWORD_FILE"
	[ -z "$WWW_ROOT" ] && errorExit "You have not initialized WWW_ROOT"
	[ -z "$WWW_USER" ] && errorExit "You have not initialized WWW_USER"
	[ -z "$WWW_GROUP" ] && errorExit "You have not initialized WWW_GROUP"
}

initializeWwwRootVar() {
	WWW_ROOT=${WWW_ROOT:-/var/rutorrent}
}

createWebServerUserGroup() {
	verifyWebServerVars
	if ! grep -qE "^$WWW_GROUP:" /etc/group; then
		groupadd -r $WWW_GROUP 2>/dev/null || groupadd $WWW_GROUP || errorExit "Could not create web server group."
	fi
	if ! grep -qE "^$WWW_USER:" /etc/passwd; then
		local useradd="useradd -d $WWW_ROOT -g $WWW_GROUP -s /bin/sh"
		$useradd -M -r $WWW_USER 2>/dev/null || $useradd $WWW_USER || errorExit "Could not create web server user."
	fi
}

resetAuthPasswordFilePermissions() {
	[ -n "$WWW_USER" ] || errorExit "WWW_USER not initialized"
	[ -n "$WWW_GROUP" ] || errorExit "WWW_GROUP not initialized"
	chmod 0400 "$WWW_PASSWORD_FILE"*
	chown $WWW_USER:$WWW_GROUP "$WWW_PASSWORD_FILE"*
}

createAuthPasswordFile() {
	verifyWebServerVars
	: > "$WWW_PASSWORD_FILE"
	resetAuthPasswordFilePermissions
}

# Some web servers (eg. nginx) can't allow just ONE user access to a certain
# location. To fix that, create one password file per user.
createOnePasswordFilePerUser() {
	for packedUser in $USERS; do
		extractPackedUser $packedUser
		grep "^$webUser:" "$WWW_PASSWORD_FILE" > "${WWW_PASSWORD_FILE}_$webUser"
	done
	resetAuthPasswordFilePermissions
}

updatePhpTimezone() {
	if [ ! -f "$WWW_PHP_INI" ]; then
		echo "${CWARNING}Could not find php.ini file: $WWW_PHP_INI$CEND"
		return
	fi
	[ -z "$USER_TIMEZONE" ] && return

	local zws="[ 	]*"
	local newLine="date.timezone = $USER_TIMEZONE"
	if grep -qE "^${zws}date\\.timezone[ 	=]" "$WWW_PHP_INI"; then
		return
	elif grep -qE "^${zws}[;#]${zws}date\\.timezone[ 	=]" "$WWW_PHP_INI"; then
		sed_i "s!^${zws}[;#]${zws}date\\.timezone[ 	=].*\$!$newLine!" "$WWW_PHP_INI"
	else
		cat >> "$WWW_PHP_INI" << EOF
[Date]
$newLine
EOF
	fi
}

doDetectTimeZone() {
	echo "${CMSG}Detecting timezone...$CEND"
	detectTimeZone
	if [ -n "$USER_TIMEZONE" ]; then
		echo "${CMSG}Timezone: $USER_TIMEZONE$CEND"

		updatePhpTimezone
	else
		echo "${CWARNING}Could not detect timezone!$CEND"
	fi
}

webServerCommonInitialization() {
	mkdir -p $WWW_ROOT
	doDetectTimeZone
	createSelfSignedCertFile "$WWW_PEMFILE"
	createAuthPasswordFile
}

resetWebServerPermissions() {
	verifyWebServerVars
	chown -R $WWW_USER:$WWW_GROUP $WWW_ROOT || errorExit "Could not set web server as owner of $WWW_ROOT"
}

createPhpcgiSocket() {
	PHPCGI_SOCKET_DIR=/etc/phpcgi
	PHPCGI_SOCKET_FILE="$PHPCGI_SOCKET_DIR/php-cgi.socket"
	mkdir -p "$PHPCGI_SOCKET_DIR"
	chown $WWW_USER:$WWW_GROUP "$PHPCGI_SOCKET_DIR"
	chmod 0770 "$PHPCGI_SOCKET_DIR"
}

nginxGetRpcMounts() {
	if [ "$INSTALL_RUTORRENT" = y ]; then
		local i=1
		local lp=; isWebServerRpcModule || lp='#'
		for packedUser in $USERS; do
			extractPackedUser $packedUser
			getUserScgiSocketPath "$osUser"
			local rpcMount="$(getUserRpcMount $i)"

			cat << EOF
$lp		location ~ ^$rpcMount\$ {
$lp			include scgi_params;
$lp			scgi_pass unix:$scgiSocketPath;
$lp			auth_basic "$RUTORRENT_SITE_REALM";
$lp			auth_basic_user_file "${WWW_PASSWORD_FILE}_$webUser";
$lp		}
EOF

			i=$(expr $i + 1)
		done
	fi
}

nginxGetServerSection() {
	local port=$1
	local ssl=$2
	if [ "$ssl" = y ]; then
		local listenport="listen $port ssl";
	fi
	if [ "$ssl" = n ]; then
		local listenport="listen $port";
	fi
	

	cat << EOF
	server {
		$listenport;
		server_name localhost;
		auth_basic "$RUTORRENT_SITE_REALM";
		auth_basic_user_file "$WWW_PASSWORD_FILE";

$(if [ "$ssl" = y ]; then
	cat << EOF2
		ssl_certificate $WWW_PEMFILE;
		ssl_certificate_key $WWW_PEMFILE;
EOF2
fi)

		location ~ ^/rutorrent/(?:share|conf) {
			deny all;
		}

		location ~ /\.ht {
			deny all;
		}

		location ~ /\.svn {
			deny all;
		}

		location / {
			root $WWW_ROOT;
			index index.php index.html index.htm;
		}

		location ~ \.php$ {
			root "$WWW_ROOT";
			fastcgi_pass unix:$PHPCGI_SOCKET_FILE;
			fastcgi_index index.php;
			fastcgi_param SCRIPT_FILENAME \$document_root\$fastcgi_script_name;
			include fastcgi_params;
		}

$(nginxGetRpcMounts)
	}
EOF
}

nginxWriteConfFile() {
	getNumCpus
	cat > $NGINX_CONF << EOF
worker_processes $NUMCPUS;
user $WWW_USER $WWW_GROUP;
events {
	worker_connections 1024;
}

http {
	include mime.types;
	default_type application/octet-stream;
	sendfile on;
	keepalive_timeout 65;

	# I have to set min length to 0 and http version to 1.0 or it won't compress
	# the XML-RPC (SCGI) responses. Those responses can be quite large if you're
	# using many torrent files.
	gzip on;
	gzip_min_length 0;
	gzip_http_version 1.0;
	gzip_types text/plain text/xml application/xml application/json text/css application/x-javascript text/javascript application/javascript;

$(nginxGetServerSection $HTTP_PORT n)
$(nginxGetServerSection $HTTPS_PORT y)
}
EOF
	[ $? -eq 0 ] || errorExit "Could not write to file $NGINX_CONF"
}

buildNginx() {
	buildStart
	PREFIX=$NGINX_DIR
	NGINX_BIN=$PREFIX/sbin/nginx
	NGINX_CONF=$PREFIX/conf/nginx.conf
	NGINX_PID_FILE=$PREFIX/nginx.pid
	NGINX_ACCESS_LOG=$PREFIX/logs/access.log
	NGINX_ERROR_LOG=$PREFIX/logs/error.log
	local configureFlags="\
				--prefix=$PREFIX \
				--sbin-path=$NGINX_BIN \
				--conf-path=$NGINX_CONF \
				--pid-path=$NGINX_PID_FILE \
				--lock-path=$PREFIX/logs/nginx.lock \
				--error-log-path=$NGINX_ERROR_LOG \
				--http-log-path=$NGINX_ACCESS_LOG \
				--user=$WWW_USER \
				--group=$WWW_GROUP \
				--with-http_ssl_module"
	export CFLAGS="$NGINX_CFLAGS"
	downloadAndBuild "nginx" "$NGINX_URL" "$NGINX_NAME" "$configureFlags" patchNginx
	unset CFLAGS
	buildEnd
}

patchNginx() {
	# Get rid of the -Werror flag for gcc 4.6.0
	sed_i "s!-Werror[a-zA-Z0-9=-]*!!" "auto/cc/gcc"
}

installNginx() {
	SCGI_USE_UNIX_DOMAIN_SOCKET=y
	CREATE_ONE_PASSWORD_FILE_PER_USER=y
	installBuildTools
	osHandler_$os preNginxInstall
	#installUnrar

	NGINX_DIR=/usr/local/nginx
	initializeWwwRootVar
	WWW_PASSWORD_FILE=$NGINX_DIR/rutorrent_passwd
	WWW_PEMFILE=$NGINX_DIR/rutorrent.pem
	WWW_USER=${WWW_USER:-nginx}
	WWW_GROUP=${WWW_GROUP:-nginx}

	detectPhpCgi
	createWebServerUserGroup
	createPhpcgiSocket

	buildNginx
	webServerCommonInitialization
	nginxWriteConfFile

	addLogrotateConfig nginx \
			"$NGINX_ACCESS_LOG $NGINX_ERROR_LOG" \
			"[ -f \"$NGINX_PID_FILE\" ] && kill -USR1 \$(cat \"$NGINX_PID_FILE\") >/dev/null 2>&1; true"

	resetWebServerPermissions
	osHandler_$os installPhpCgiService
	osHandler_$os installNginxService
}

# Add $name=$value to the file, or modify an existing line if present in the file
setVsftpdValue() {
	local confFile="$1"
	local name="$2"
	local value="$3"
	local newLine="$name=$value"

	sed_i "s!^[ 	]*$name[ 	=:].*\$!$newLine!" "$confFile"
	grep -qE "^$newLine$" "$confFile" || echo "$newLine" >> "$confFile"
}

# Same as setVsftpdValue but makes sure the option exists
setVsftpdValue2() {
	local confFile="$1"
	local name="$2"
	local value="$3"

	[ -z "$VSFTPD_PATH" ] && return
	grep -q "$name" "$VSFTPD_PATH" && setVsftpdValue "$confFile" "$name" "$value"
}

updateVsftpdConf() {
	local confFile="$1"
	touch "$confFile"

	VSFTPD_PATH=$(which vsftpd 2>/dev/null)

	setVsftpdValue "$confFile" anonymous_enable NO
	setVsftpdValue "$confFile" dirlist_enable YES
	setVsftpdValue "$confFile" download_enable YES
	setVsftpdValue "$confFile" guest_enable NO
	setVsftpdValue "$confFile" listen YES
	setVsftpdValue "$confFile" listen_ipv6 NO
	setVsftpdValue "$confFile" local_enable YES
	setVsftpdValue "$confFile" local_umask $DEFAULT_UMASK
	setVsftpdValue "$confFile" max_per_ip 0
	setVsftpdValue "$confFile" pasv_enable YES
	setVsftpdValue "$confFile" port_enable YES
	setVsftpdValue "$confFile" pasv_promiscuous NO
	setVsftpdValue "$confFile" port_promiscuous NO
	setVsftpdValue "$confFile" pasv_min_port 0
	setVsftpdValue "$confFile" pasv_max_port 0
	setVsftpdValue "$confFile" write_enable YES

	if [ "$USE_ENCRYPTED_FTP" = y ]; then
		local pemfile=/etc/vsftpd.pem
		createSelfSignedCertFile "$pemfile"

		FTP_SERVER_TYPE="FTPES - Encrypted (FTP over explicit TLS/SSL)"
		FTP_PORT=${FTP_PORT:-$DEFAULT_PORT_FTPES}
		setVsftpdValue "$confFile" listen_port $FTP_PORT
		setVsftpdValue "$confFile" ssl_enable YES

		setVsftpdValue "$confFile" allow_anon_ssl NO
		setVsftpdValue "$confFile" force_local_data_ssl YES
		setVsftpdValue "$confFile" force_local_logins_ssl YES
		setVsftpdValue "$confFile" ssl_sslv2 NO
		setVsftpdValue "$confFile" ssl_sslv3 NO
		setVsftpdValue "$confFile" ssl_tlsv1 YES
		setVsftpdValue "$confFile" rsa_cert_file "$pemfile"

		setVsftpdValue2 "$confFile" implicit_ssl NO
		setVsftpdValue2 "$confFile" require_cert NO
		setVsftpdValue2 "$confFile" require_ssl_reuse NO
		setVsftpdValue2 "$confFile" ssl_request_cert YES
		setVsftpdValue2 "$confFile" strict_ssl_read_eof NO
		setVsftpdValue2 "$confFile" strict_ssl_write_shutdown NO
		setVsftpdValue2 "$confFile" validate_cert NO
	else
		FTP_SERVER_TYPE="FTP - Non-encrypted"
		FTP_PORT=${FTP_PORT:-$DEFAULT_PORT_FTP}
		setVsftpdValue "$confFile" listen_port $FTP_PORT
		setVsftpdValue "$confFile" ssl_enable NO
	fi

	# The private key is in rsa_cert_file
	sed_i 'g/rsa_private_key_file/d' "$confFile"
}

installVsftpd_chkconfig() {
	local vsftpdConf="$1"
	installProgram vsftpd
	[ -f "$vsftpdConf" ] || errorExit "Invalid vsftpd.conf file: $vsftpdConf"
	updateVsftpdConf "$vsftpdConf"
	chkconfig vsftpd on
	if ! service vsftpd restart; then
		if [ "$SELINUX_ENABLED" = y ]; then
			errorExit "Could not restart vsftpd. SELinux could be the reason."
		else
			errorExit "Could not restart vsftpd"
		fi
	fi
}

installService_chkconfig1() {
	CHKCONFIG_SERVICE_NAME=$1
	CHKCONFIG_SERVICE_FILE=/etc/init.d/$CHKCONFIG_SERVICE_NAME
	CHKCONFIG_LOCK_FILE=/var/lock/subsys/$CHKCONFIG_SERVICE_NAME
}

installService_chkconfig2() {
	chmod +x "$CHKCONFIG_SERVICE_FILE" || errorExit "Could not set +x bit, file $CHKCONFIG_SERVICE_FILE."
	chkconfig --add $CHKCONFIG_SERVICE_NAME || errorExit "Could not install service $CHKCONFIG_SERVICE_FILE. Run this script as root."
	service $CHKCONFIG_SERVICE_NAME restart
}

getChkconfigScriptContents() {
	local desc="$1"
	cat << EOF
# chkconfig: 2345 85 15
# description: $desc
EOF
}

getLsbStartupScriptContents() {
	local startupName="$1"
	local desc="$2"
	cat << EOF
### BEGIN INIT INFO
# Provides:          $startupName
# Required-Start:    \$local_fs \$network \$syslog
# Required-Stop:     \$local_fs \$syslog
# Default-Start:     $LSB_DEFAULT_START
# Default-Stop:      $LSB_DEFAULT_STOP
# Short-Description: $desc
# Description:       $desc
### END INIT INFO
EOF
}

# You must define v_{startIt,stopIt,restartIt,showStatus} and isStarted funcs
getLsbStartupFooter() {
	cat << EOF
resetPath	# Some include files may have reset it
LOCKFILE=$1
updateLock() {
	[ -z "\$LOCKFILE" ] && return
	if isStarted; then
		touch \$LOCKFILE
	else
		rm -f \$LOCKFILE
	fi
}

RETVAL=0
case \$1 in
	start)
		v_startIt
		;;
	stop)
		v_stopIt
		;;
	force-reload|restart)
		v_restartIt
		;;
	try-restart)
		isStarted && v_restartIt
		;;
	status)
		v_showStatus
		;;
	*)
		echo "Usage: \$0 {start|stop|restart|try-restart|force-reload|status}"
		RETVAL=1
		;;
esac

updateLock
exit \$RETVAL
EOF
}

getCommonStartupScriptContents_rtorrent() {
	local USER="$1"
	local STARTUPNAME="$2"
	cat << EOF
NAME=$STARTUPNAME
USER=$USER
SESSIONNAME=rtorrent

resetPath() {
	PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:\$PATH"
}
resetPath

# Make sure the path is correct, and make sure we're in the home dir.
USER_INIT="umask $DEFAULT_UMASK; cd; PATH=\\\$PATH:\$PATH"

# Run user command, ignoring any messages sent to stdout (eg. 'No mail.')
runUserCmd() {
	su - \$USER -c "\$USER_INIT; \$1" >/dev/null && return 0
	return 1
}

isStarted() {
	su - \$USER -c "\$USER_INIT; screen -ls | grep -qE \\"[ 	][0-9]+\\\\.\$SESSIONNAME[ 	]\\"" >/dev/null && return 0
	return 1
}

startIt() {
	isStarted && return 0

	local START_RTORRENT=n
	which rtorrent > /dev/null 2>&1 && START_RTORRENT=y

	case \$START_RTORRENT in
		y)
			runUserCmd "screen -S \$SESSIONNAME -d -t rtorrent -m rtorrent"
			;;
		n)
			;;
	esac
	return 0
}

stopIt() {
	isStarted || return 0

	runUserCmd "screen -d -r \$SESSIONNAME -p irssi -X stuff \\"/quit
/quit
\\""
	runUserCmd "screen -d -r \$SESSIONNAME -p rtorrent -X xon"

	for i in 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4; do
		isStarted || break
		sleep 1
	done

	# If it's still not stopped, kill the whole screen session
	if isStarted; then
		echo -n "Couldn't stop it. Killing screen session..."
		runUserCmd "screen -d -r \$SESSIONNAME -p rtorrent -X xon"
		sleep 2
		runUserCmd "screen -d -r \$SESSIONNAME -X quit"
		echo "Done."
	fi

	return 0
}

v_restartIt() {
	v_stopIt
	v_startIt
}

v_showStatus() {
	if isStarted; then
		echo "\$NAME is running."
	else
		echo "\$NAME is stopped."
	fi
}
EOF
}

getChkconfigScriptContents_rtorrent() {
	getChkconfigScriptContents "$RTORRENT_STARTUP_DESC"
}

getLsbStartupHeader_rtorrent() {
	local USER="$1"
	local STARTUPNAME="$2"
	cat << EOF
$(getChkconfigScriptContents_rtorrent)
$(getLsbStartupScriptContents "$STARTUPNAME" "$RTORRENT_STARTUP_DESC")

$(getCommonStartupScriptContents_rtorrent "$USER" "$STARTUPNAME")
EOF
}

installService_bsd_rtorrent() {
	local user="$1"
	local scriptName="$2"
	local file="$3"

	cat > "$file" << EOF
#!/bin/sh
# PROVIDE: rtorrent_$user
# REQUIRE: FILESYSTEMS NETWORKING
# KEYWORD: shutdown

. /etc/rc.subr

name=$scriptName
desc="RTORRENT_STARTUP_DESC"
start_cmd=v_startIt
stop_cmd=v_stopIt
restart_cmd=v_restartIt
reload_cmd=v_restartIt
status_cmd=v_showStatus
extra_commands="status"

v_startIt() {
	echo -n "Starting \$NAME"
	startIt && echo "." || echo ". ERROR."
}

v_stopIt() {
	echo -n "Stopping \$NAME..."
	stopIt && echo "done." || echo "ERROR."
}

$(getCommonStartupScriptContents_rtorrent "$user" "$scriptName")

load_rc_config \$name
run_rc_command "\$1"
EOF
	[ $? -eq 0 ] || errorExit "Could not write to file $file. Run this script as root."
	chmod +x "$file"
}


getCommonStartupScriptContents_simpleService() {
	local USER="$1"
	local BINPATH="$2"
	local START_CMD="$3"
	local PID_FILE="$4"
	cat << EOF
USER=$USER
BINPATH="$BINPATH"
NAME=\${BINPATH##*/}
PID_FILE="$PID_FILE"

resetPath() {
	PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:\$PATH"
}
resetPath

getPids() {
	if [ -n "\$PID_FILE" ]; then
		pids=
		[ -f "\$PID_FILE" ] || return
		local the_pids="\$(cat "\$PID_FILE" 2>/dev/null)"
		for pid in \$the_pids; do
			PS_FORMAT= LINES= COLUMNS= ps ax | grep -qE "^[ 	]*\$pid[ 	]" && pids="\$pids \$pid"
		done
		[ -z "\$pids" ] && rm -f "\$PID_FILE"
	else
		# ps uses the COLUMNS variable... Make sure it's off so we get the full path.
		pids=\$(PS_FORMAT= LINES= COLUMNS= ps aux | grep -v grep | grep \$BINPATH | awk '{print \$2}')
	fi
}

isStarted() {
	getPids
	[ -n "\$pids" ] && return 0
	return 1
}

startIt() {
	isStarted && return 0

	if [ \$USER = root ]; then
		$START_CMD
	else
		su - \$USER "-c $START_CMD"
	fi
	[ -n "\$PID_FILE" ] && sleep 2	# Allow it some time to create the pid file
	if ! isStarted; then
		for i in 1 2 3 4 5; do
			sleep 1
			isStarted && break
		done
		isStarted || return 1
	fi

	return 0
}

stopIt() {
	isStarted || return 0

	kill \$pids 2>/dev/null

	for i in 0 1 2 3 4 5 6 7 8 9; do
		isStarted || break
		sleep 1
	done

	isStarted && kill -KILL \$pids 2>/dev/null

	return 0
}

v_startIt() {
	startIt
}

v_stopIt() {
	stopIt
}

v_restartIt() {
	v_stopIt
	v_startIt
}

v_showStatus() {
	if isStarted; then
		echo "\$NAME is running."
	else
		echo "\$NAME is stopped."
	fi
}
EOF
}

getCommonStartupScriptContents_phpcgi() {
	[ -n "$PHPCGI_SOCKET_FILE" ] || errorExit "PHPCGI_SOCKET_FILE is not initialized"
	getCommonStartupScriptContents_simpleService "$1" "$2" \
		"PHP_FCGI_CHILDREN=5 PHP_FCGI_MAX_REQUESTS=125 \$BINPATH -q -b \"$PHPCGI_SOCKET_FILE\" &"
}

getLsbStartupHeader_phpcgi() {
	getChkconfigScriptContents "$PHPCGI_STARTUP_DESC"
	getLsbStartupScriptContents phpcgi "$PHPCGI_STARTUP_DESC"

	getCommonStartupScriptContents_phpcgi "$WWW_USER" "$WWW_PHP_CGI"
}

getCommonStartupScriptContents_nginx() {
	getCommonStartupScriptContents_simpleService "root" "$1" "\$BINPATH" "$NGINX_PID_FILE"
}

getLsbStartupHeader_nginx() {
	getChkconfigScriptContents "$NGINX_STARTUP_DESC"
	getLsbStartupScriptContents nginx "$NGINX_STARTUP_DESC"

	getCommonStartupScriptContents_nginx "$NGINX_BIN"
}

addLsbHeaderToStartupScript() {
	local scriptPath="$1"
	local provides="${2:-$scriptPath}"
	local desc="${3:-$provides}"
	[ -x "$scriptPath" ] || return
	grep -qE '^### BEGIN INIT INFO' "$scriptPath" && return
	ed -s "$scriptPath" > /dev/null 2>&1 << EOF
1a
$(getLsbStartupScriptContents "$provides" "$desc")
.
w
q
EOF
}

installMissingPerlModules() {
	detectMissingPerlModules
	[ -z "$MISSING_PERL_MODULES" ] && return
	cat << EOF
$CWARNING
The following Perl modules are still missing:
	$MISSING_PERL_MODULES
I'll try to use the cpan script to install them.$CEND
EOF

	# Some Perl modules will fail to build unless Test::More is installed
	MISSING_PERL_MODULES="Test::More $MISSING_PERL_MODULES"

	echo "${CMSG}Installing cpan and required build tools...$CEND"
	installBuildTools
	osHandler_$os installCpanTools
	detectCpanBin
	if [ -n "$CPAN" ]; then
		$CPAN $MISSING_PERL_MODULES
	else
		local mods=
		for mod in $MISSING_PERL_MODULES; do
			[ -n "$mods" ] && mods="$mods,"
			mods="$mods \"$mod\""
		done
		perl -MCPAN -e "CPAN::Shell->install($mods)"
	fi

	detectMissingPerlModules
	[ -z "$MISSING_PERL_MODULES" ] && return
	errorExit "CPAN somehow failed to install the missing Perl modules. Missing: $MISSING_PERL_MODULES"
}

osHandler_debian() {
	case $1 in
		init)
			INSTALL="apt-get -y install"
			FEATURES="service rtorrent nginx vsftpd webmin"
			BUILD_TOOLS="build-essential make file pkg-config libtool m4 zlib1g-dev automake"
			;;
		init2)

			apt-get update
			#export DEBIAN_FRONTEND=noninteractive
			installProgram ed

			# Make sure Debian 6 doesn't fail when adding new services. We need ed for this
			# so run it after installing ed...
			addLsbHeaderToStartupScript /etc/init.d/webmin "webmin" "webmin"
			;;
		installTools)
			PACKAGES=
			addProgram mediainfo
			addProgram git-core
			addProgram svn subversion
			addProgram wget
			addProgram unzip
			addProgram screen
			addProgram perl
			addPerlModule Archive::Zip libarchive-zip-perl
			addPerlModule HTML::Parser libhtml-parser-perl
			addPerlModule Digest::SHA libdigest-sha-perl
			installPackages
			
			installPerlModule Net::SSLeay libnet-ssleay-perl
			installPerlModule XML::LibXML libxml-libxml-perl
			installPerlModule JSON::XS libjson-xs-perl
			installPerlModule JSON libjson-perl
			# Make sure subversion won't complain about invalid certs
			$INSTALL ca-certificates
			;;
		installCpanTools)
			# Need to remove the old JSON or cpan may fail to build the modules
			if echo "$OLD_PERL_MODULES" | grep -qE '(^| )JSON( |$)'; then
				apt-get -y remove libjson-perl
			fi

			PACKAGES=
			if echo "$MISSING_PERL_MODULES" | grep -q 'XML::LibXML'; then
				PACKAGES="$PACKAGES libxml2 libxml2-dev zlib1g zlib1g-dev"
			fi
			if echo "$MISSING_PERL_MODULES" | grep -q 'Net::SSLeay'; then
				# There's no libssl package
				PACKAGES="$PACKAGES openssl libssl-dev zlib1g zlib1g-dev"
			fi
			installPackages
			;;
		installRtorrentBuildTools)
			PACKAGES="libsigc++-2.0-dev libssl-dev libncurses-dev"
			if apt-cache search libcurl4-openssl-dev 2> /dev/null | grep -q 'libcurl4-openssl-dev'; then
				PACKAGES="$PACKAGES libcurl4-openssl-dev"
			else
				PACKAGES="$PACKAGES libcurl3-openssl-dev"
			fi
			installPackages
			;;
		installPhpModules)
			installMissingPhpPackages
			;;
		_installService)
			local serviceName="$2"
			local headerCommand="$3"
			local serviceFile=/etc/init.d/$serviceName
			local lockFile=
			cat > "$serviceFile" << EOF
#!/bin/sh
$(eval $headerCommand)

. /lib/lsb/init-functions

v_startIt() {
	log_begin_msg "Starting \$NAME..."
	startIt
	log_end_msg \$?
}

v_stopIt() {
	log_begin_msg "Stopping \$NAME..."
	stopIt
	log_end_msg \$?
}

$(getLsbStartupFooter "$lockFile")
EOF
			[ $? -eq 0 ] || errorExit "Could not write to file $serviceFile. Run this script as root."
			chmod +x "$serviceFile" || errorExit "Could not set +x bit, file $serviceFile."
			update-rc.d $serviceName defaults || errorExit "Could not install service $serviceFile. Run this script as root."
			invoke-rc.d $serviceName restart
			;;
		installRtorrentService)
			local user=$2
			osHandler_$os _installService rtorrent_$user "getLsbStartupHeader_rtorrent \"$user\" \"\$serviceName\""
			;;
		_installCommonWebServerStuff)
			# Also add some extra tools for ruTorrent and some of its plugins
			if [ -f /etc/os-release ]; then
				. /etc/os-release
				OS_RELEASE_NAME=$ID
				#OS_RELEASE_VERSION=$VERSION_ID
					if [ "$OS_RELEASE_NAME" = "ubuntu" ];then
					UBUNTU_RELEASE=$(lsb_release -r | awk '{ print $2 }' | sed 's/[.]//')
						if [ "$UBUNTU_RELEASE" -le "1604" ]; then
						PACKAGES="gzip curl openssl logrotate libpcre3-dev libssl-dev zlib1g-dev php7.0-cgi ffmpeg"
						elif [ "$UBUNTU_RELEASE" -eq "1804" ]; then
						PACKAGES="gzip curl openssl logrotate libpcre3-dev libssl-dev zlib1g-dev php7.2-cgi ffmpeg"
						elif [ "$UBUNTU_RELEASE" -eq "2004" ]; then
						PACKAGES="gzip curl openssl logrotate libpcre3-dev libssl-dev zlib1g-dev php7.4-cgi ffmpeg"
						elif [ "$UBUNTU_RELEASE" -gt "2004" ]; then
						PACKAGES="gzip curl openssl logrotate libpcre3-dev libssl-dev zlib1g-dev php-cgi ffmpeg php-cgi libpcre3-dev libbz2-dev python-is-python3 unrar"
						fi
					fi
				fi
			installPackages
			# Ubuntu 8 doesn't have php5-geoip
			PACKAGES="php-geoip"
			installPackages
			;;
		installVsftpd)
			installProgram vsftpd
			updateVsftpdConf /etc/vsftpd.conf
			invoke-rc.d vsftpd restart || errorExit "Could not restart vsftpd"
			;;
		preNginxInstall)
			WWW_PHP_INI=/etc/php/8.3/cgi/php.ini
			osHandler_$os _installCommonWebServerStuff

			# Make sure it builds on Debian GNU/kFreeBSD 6.0.
			if [ "$(uname -s)" != Linux ]; then
				NGINX_CFLAGS="-D_GNU_SOURCE -D_FILE_OFFSET_BITS=64"
			fi
			;;
		installPhpCgiService)
			osHandler_$os _installService phpcgi getLsbStartupHeader_phpcgi
			;;
		installNginxService)
			osHandler_$os _installService nginx getLsbStartupHeader_nginx
			;;
		restart_nginx)
			invoke-rc.d phpcgi restart || errorExit "Could not start php-cgi"
			invoke-rc.d nginx restart || errorExit "Could not start $INSTALL_WEB_SERVER"
			;;
		postWebminInstall)
			addLsbHeaderToStartupScript /etc/init.d/webmin "webmin" "webmin"
			;;
		*)
			;;
	esac
}

isWebServerRpcModule() {
	! arrayIsPresent rpc $RUTORRENT_PLUGINS && ! arrayIsPresent httprpc $RUTORRENT_PLUGINS && return 0
	return 1
}

canInstallService() {
	return $(arrayIsPresent service $FEATURES)
}

canInstallRtorrent() {
	return $(arrayIsPresent rtorrent $FEATURES)
}

canInstallNginx() {
	return $(arrayIsPresent nginx $FEATURES)
}

canInstallVsftpd() {
	return $(arrayIsPresent vsftpd $FEATURES)
}

canInstallWebmin() {
	return $(arrayIsPresent webmin $FEATURES)
}

getRequiredPrograms() {
	REQUIRED_PROGRAMS="which svn wget unzip ed sed grep tar expr ps awk kill printf"
}

verifyInstalledPrograms() {
	getRequiredPrograms

	local MISSING_PROGRAMS=
	for prog in $REQUIRED_PROGRAMS; do
		local name=$prog
		[ "$prog" = svn ] && name=subversion
		isProgramInstalled "$prog" || MISSING_PROGRAMS="$MISSING_PROGRAMS $name"
	done
	[ -n "$MISSING_PROGRAMS" ] && errorExit "Can't continue. The following programs are not installed: $MISSING_PROGRAMS"
}

getRtorrentDirs() {
	local user="$1"
	getUserDir "$user"
	RTORRENT_DOWNLOAD_DIR="$userDir/$RTORRENT_REL_DOWNLOAD_DIR"
	RTORRENT_WATCH_DIR="$userDir/$RTORRENT_REL_WATCH_DIR"
	RTORRENT_SESSION_DIR="$userDir/$RTORRENT_REL_SESSION_DIR"
}

getUserScgiSocketPath() {
	local user="$1"
	getRtorrentDirs "$user"
	scgiSocketPath="$RTORRENT_SESSION_DIR/rpc.socket"
}

waitenter() {
	local msg="${1-Press ENTER to continue...}"
	echo -n "$CCYAN$msg$CEND"
	read dummy
}

askQuestion() {
	local question="$1"
	local default="$2"

	if [ -z "$default" ]; then
		echo -n "$CQUESTION$question$CEND "
		read answer
	else
		echo -n "$CQUESTION$question$CEND [$CGREEN$default$CEND] "
		read answer
	fi
	if [ -z "$answer" ]; then
		answer="$default"
	fi
}

# Asks the user a question, and sets answer to y or n depending on the user's answer
askYesNo() {
	local question="$1"
	local default="$2"

	while true; do
		askQuestion "$question" "$default"
		if echo "$answer" | grep -qiE '^y(es)?$'; then
			answer=y
			return 1
		elif echo "$answer" | grep -qiE '^no?$'; then
			answer=n
			return 0
		fi
	done
}

askOsUser() {
	local stopIfEmpty=${1:-n}
	local user=
	while true; do
		askQuestion "Enter name of user:" ""
		user="$answer"
		[ -z "$user" ] && [ "$stopIfEmpty" = y ] && break
		userExists "$user" && break

		echo "${CWARNING}User $user does not exist.$CEND"
		askYesNo "Do you want to create user $user?" "No"
		[ "$answer" = n ] && continue

		echo "${CMSG}Creating user $user.$CEND"
		if ! useradd -m -s /bin/sh "$user"; then
			echo "${CWARNING}Could not create user $user.$CEND"
			continue
		fi
		echo "${CMSG}Enter the user's password:$CEND"
		if ! passwd "$user"; then
			echo "${CWARNING}Failed to set password.$CEND"
			continue
		fi
		userExists "$user" && break
	done
	answer="$user"
}

# Adds another user to USERS
addUser() {
	local osUser="$1"
	USERS="$USERS $osUser"
}

getRutorrentUserConfDir() {
	userConfDir="$RUTORRENT_BASE_PATH/conf/users/$webUser"
}

getRutorrentUserShareDir() {
	userShareDir="$RUTORRENT_BASE_PATH/share/users/$webUser"
}

resetRutorrentUserPermissions() {
	for packedUser in $USERS; do
		extractPackedUser $packedUser
		getRutorrentUserConfDir
		getRutorrentUserShareDir
		# Make sure only the web server and the user itself can access its share/conf dirs
		chown $osUser:$WWW_GROUP "$userShareDir" "$userConfDir"
		chmod 0770 "$userShareDir" "$userConfDir"
	done
}

############################################################################
#
# This is where we start
#
############################################################################

SELINUX_ENABLED=n
isProgramInstalled selinuxenabled && selinuxenabled && SELINUX_ENABLED=y
echo "SELinux enabled: $SELINUX_ENABLED"

ISROOT=n
[ $(id -u) -eq 0 ] && ISROOT=y
echo "Is root user: $ISROOT"

if [ $# -gt 0 ]; then
	parseCommandLine "$@"
	INTERACTIVE=n
else
	INTERACTIVE=y
fi

detectOs
cat << EOF
Detected OS: $CGREEN$os_long$CEND
Type: $CGREEN$os$CEND

Type sh $0 --help for all command line options.
EOF

osHandler_$os init

if [ "$INTERACTIVE" = y ]; then
	if [ "$ISROOT" = n ]; then
		cat << EOF
$CRED
You're not the root user! This install script may fail if you're not the root
user. To start it as the root user do one of the following:

Ubuntu and Ubuntu clones:
	${CGREEN}sudo sh $0$CRED

Any other OS:
	${CGREEN}su
	sh $0$CRED
$CEND
EOF
		waitenter "Press Ctrl+C to exit or ENTER to continue..."
	fi

	cat << EOF
$CMSG
Press ENTER to use the default answer in [brackets].$CEND
EOF

	webServers=
	canInstallNginx		&& webServers="$webServers nginx"
	if [ -n "$webServers" ]; then
		cat << EOF
$CQUESTION
If you want to install ruTorrent you must install a web server, eg. Apache.
If you've already installed another web server, you must first uninstall it or
disable it. List of supported web servers:$CEND
EOF
		canInstallNginx		&& echo "  ${CGREEN}nginx$CEND    ${CQUESTION}nginx web server (lightweight)$CEND"
							   echo "  ${CGREEN}none$CEND     ${CQUESTION}Don't install a web server$CEND"
		while true; do
			INSTALL_WEB_SERVER=
			echo "${CQUESTION}Select one of:$CGREEN$webServers none$CEND"
			askQuestion "Enter name of web server" "$(getFirst $webServers)"
			[ "$answer" = none ] && break
			INSTALL_WEB_SERVER="$answer"
			arrayIsPresent $INSTALL_WEB_SERVER $webServers && break
		done
		if [ -n "$INSTALL_WEB_SERVER" ]; then
			askYesNo "Do you want to install ruTorrent?" "Yes"
			INSTALL_RUTORRENT="$answer"
		else
			INSTALL_RUTORRENT=n
		fi
	fi

	if canInstallRtorrent; then
		cat << EOF
$CQUESTION
ruTorrent requires a working rtorrent built with TinyXML2 support.$CEND
EOF
		askYesNo "Do you want to build rtorrent?" "Yes"
		BUILD_RTORRENT="$answer"
	fi

	if [ "$INSTALL_RUTORRENT" = y ]; then
		RUTORRENT_PASSWORD_PROTECTED=y

		cat << EOF
$CQUESTION
To use more than one ruTorrent user, you must password protect ruTorrent.$CEND
EOF
		askYesNo "Is ruTorrent password protected?" "No"
		RUTORRENT_PASSWORD_PROTECTED="$answer"
	else
		RUTORRENT_PASSWORD_PROTECTED=n
	fi

	if canInstallService && ([ "$INSTALL_RUTORRENT" = y ]); then
		cat << EOF
$CQUESTION
If you want to automatically start rtorrent when the computer boots,
install the startup script.$CEND
EOF
		askYesNo "Do you want to install the startup script?" "Yes"
		INSTALL_STARTUP_SCRIPT="$answer"
	fi

	askUser=n
	if [ "$INSTALL_STARTUP_SCRIPT" = y ] || [ "$INSTALL_RUTORRENT" = y ]; then
		askUser=y
	fi
	if [ "$askUser" = y ]; then
		if [ "$RUTORRENT_PASSWORD_PROTECTED" = n ]; then
				cat << EOF
$CQUESTION
This is the user running rtorrent.$CEND
${CWARNING}Don't use the root user. Use a normal user!$CEND
EOF
				askOsUser
				addUser "$answer" ""
		else
			while true; do
				cat << EOF
$CQUESTION
===================== USER =====================
This is the user running rtorrent.
${CWARNING}Don't use the root user. Use a normal user!$CEND
${CCYAN}Press ENTER to stop adding users.$CEND
EOF
				askOsUser y
				osUser="$answer"
				[ -z "$osUser" ] && break

				while true; do
					cat << EOF
$CQUESTION
The ruTorrent user is the name you use to log in to ruTorrent.$CEND
EOF
					askQuestion "Enter ruTorrent user:" "$osUser"
					webUser="$answer"
					isValidWebUser "$webUser" && break
					echo "${CWARNING}Invalid web user name '$webUser'. Use only lower case letters."
				done

				addUser "$osUser" "$webUser"
			done
		fi
	fi

	if canInstallVsftpd; then
		cat << EOF
$CQUESTION
vsftpd is a very secure FTP daemon.$CEND
EOF
		askYesNo "Do you want to install vsftpd?" "Yes"
		INSTALL_VSFTPD="$answer"

		if [ "$INSTALL_VSFTPD" = y ]; then
			askYesNo "Do you want to use encrypted FTP (FTPES)" "Yes"
			USE_ENCRYPTED_FTP="$answer"

			port=$DEFAULT_PORT_FTP
			[ "$USE_ENCRYPTED_FTP" = y ] && port=$DEFAULT_PORT_FTPES
			askQuestion "Enter FTP port number" "$port"
			FTP_PORT="$answer"
		fi
	fi

	if canInstallWebmin; then
		cat << EOF
$CQUESTION
Webmin is a web-based administration tool for your OS.$CEND
EOF
		askYesNo "Do you want to install Webmin?" "Yes"
		INSTALL_WEBMIN="$answer"
	fi
fi

cmdline="sh $0"
for user in $USERS; do cmdline="$cmdline -u $user"; done
[ "$RUTORRENT_PASSWORD_PROTECTED" = y ] && cmdline="$cmdline -w"
[ -n "$RUTORRENT_BASE_PATH" ] && cmdline="$cmdline -r '$RUTORRENT_BASE_PATH'"
[ "$INSTALL_STARTUP_SCRIPT" = y ] && cmdline="$cmdline -s"
if [ -z "$INSTALL_WEB_SERVER" ]; then
	:
elif [ "$INSTALL_WEB_SERVER" = nginx ]; then
	cmdline="$cmdline --nginx"
else
	errorExit "Invalid web server: $INSTALL_WEB_SERVER"
fi
[ "$BUILD_RTORRENT" = y ] && cmdline="$cmdline --rtorrent"
[ "$INSTALL_RUTORRENT" = y ] && cmdline="$cmdline --rutorrent"
[ "$INSTALL_VSFTPD" = y ] && cmdline="$cmdline --vsftpd"
[ -n "$FTP_PORT" ] && cmdline="$cmdline --ftp-port $FTP_PORT"
[ "$USE_ENCRYPTED_FTP" = y ] && cmdline="$cmdline --ftpes"
[ "$INSTALL_WEBMIN" = y ] && cmdline="$cmdline --webmin"

cat << EOF

You can execute this command as the root user (Ubuntu: use ${CRED}sudo$CEND):
  $CGREEN$cmdline$CEND

Users: $USERS
ruTorrent is password protected: $RUTORRENT_PASSWORD_PROTECTED
ruTorrent base path: $RUTORRENT_BASE_PATH
Install startup script: $INSTALL_STARTUP_SCRIPT
Install web server: $INSTALL_WEB_SERVER
Build rtorrent: $BUILD_RTORRENT
Install ruTorrent: $INSTALL_RUTORRENT
Install vsftpd: $INSTALL_VSFTPD
FTP port: $FTP_PORT
Use FTPES: $USE_ENCRYPTED_FTP
Install Webmin: $INSTALL_WEBMIN
EOF

if [ -n "$INSTALL_WEB_SERVER" ]; then
	for port in $HTTP_PORT $HTTPS_PORT; do
		isPortUsed $port || continue
		cat << EOF
$CWARNING
Port $port is in use. If it's not used by $INSTALL_WEB_SERVER, you may need to disable or
uninstall that other web server before continuing.$CEND
EOF
	done
fi

if [ "$INTERACTIVE" = y ]; then
	echo ""
	waitenter "Press Ctrl+C to cancel or ENTER to install."
fi

osHandler_$os init2
initUsers

[ -n "$INSTALL_WEB_SERVER" ] || [ "$INSTALL_RUTORRENT" = y ] && RUTORRENT_PASSWORD_PROTECTED=y
[ "$INSTALL_RUTORRENT" = y ] && [ -z "$INSTALL_WEB_SERVER" ] && errorExit "You must install a web server if you want to install ruTorrent, eg. use --nginx --rutorrent"
[ "$INSTALL_RUTORRENT" = y ] && REINSTALL_RUTORRENT_PLUGIN=n

[ "$BUILD_RTORRENT" = y ] && ! canInstallRtorrent && errorExit "Can't build rtorrent."
[ "$INSTALL_STARTUP_SCRIPT" = y ] && ! canInstallService && errorExit "Can't install startup script."
[ "$INSTALL_VSFTPD" = y ] && ! canInstallVsftpd && errorExit "Can't install vsftpd."
[ "$INSTALL_WEBMIN" = y ] && ! canInstallWebmin && errorExit "Can't install webmin."

if [ -z "$INSTALL_WEB_SERVER" ]; then
	:
elif [ "$INSTALL_WEB_SERVER" = nginx ]; then
	canInstallNginx || errorExit "Can't install nginx."
else
	errorExit "Invalid web server: $INSTALL_WEB_SERVER"
fi

[ -n "$FTP_PORT" ] && [ "$FTP_PORT" -lt 1 -o "$FTP_PORT" -gt 65535 ] && errorExit "Invalid FTP port: $FTP_PORT"

osHandler_$os installTools
setSvnOpts

verifyInstalledPrograms

cat << EOF
$CMSG
All required programs and Perl modules are now installed. Ignore any errors you
saw.$CEND
EOF

INSTALLED_RTORRENT=n
if [ "$BUILD_RTORRENT" = y ]; then
	cat << EOF
$CMSG
Building rtorrent and dependencies...$CEND
EOF
	installRtorrent
	INSTALLED_RTORRENT=y
fi

if [ -z "$INSTALL_WEB_SERVER" ]; then
	:
elif [ "$INSTALL_WEB_SERVER" = nginx ]; then
	echo ""
	echo "${CMSG}Installing nginx$CEND"
	installNginx
else
	errorExit "Invalid web server: $INSTALL_WEB_SERVER"
fi

if [ "$INSTALL_RUTORRENT" = y ]; then
	isProgramInstalled php || errorExit "php is not installed!"
	verifyWebServerVars
	echo ""
	echo "${CMSG}Installing ruTorrent$CEND"
	[ -d "$WWW_ROOT" ] || errorExit "Invalid web root: '$WWW_ROOT' (does not exist)"
	RUTORRENT_DIRNAME=rutorrent

	[ -f "$WWW_ROOT/index.html" ] || cat > "$WWW_ROOT/index.html" << EOF
<html><head><title>Root page</title></head><body>
<a href="$RUTORRENT_DIRNAME/">ruTorrent</a>
</body></html>
EOF

	cd "$WWW_ROOT"
	rm -rf "$RUTORRENT_DIRNAME"
	tmpName=rutorrent-tmp
	rm -rf $tmpName
	git clone "$RUTORRENT_TRUNK_DIR" $tmpName/rutorrent >/dev/null
	RUTORRENT_BASE_PATH="$WWW_ROOT/$RUTORRENT_DIRNAME"
	initPluginDirVar
	cd $tmpName
	mv rutorrent/plugins/ .
	mv rutorrent/ "$RUTORRENT_BASE_PATH"
	mkdir -p "$RUTORRENT_BASE_PATH/plugins"
	for plugin in $RUTORRENT_PLUGINS; do
		if [ -d "plugins/$plugin/" ]; then
			echo "${CMSG}Installing ruTorrent plugin: $plugin$CEND..."
			mv plugins/$plugin/ "$RUTORRENT_BASE_PATH/plugins/" || errorExit "Could not install plugin '$plugin'."
		else
			echo "${CWARNING}Can't install missing plugin $plugin!$CEND"
		fi
	done
	cd ..
	rm -rf $tmpName
	cp "$RUTORRENT_BASE_PATH/favicon.ico" "$WWW_ROOT"

	i=1
	touch "$WWW_PASSWORD_FILE"
	resetAuthPasswordFilePermissions
	detectHtpasswd
	for packedUser in $USERS; do
		extractPackedUser $packedUser
		getRutorrentUserConfDir
		getRutorrentUserShareDir
		getUserScgiSocketPath "$osUser"
		getRtorrentDirs "$osUser"

		# Create user's ruTorrent config.php
		rpcMount="$(getUserRpcMount $i)"
		mkdir -p "$userConfDir"

		rutConfigFile="$userConfDir/config.php"
		if [ "$SCGI_USE_UNIX_DOMAIN_SOCKET" = y ]; then
			cat > "$rutConfigFile" << EOF
<?php
\$scgi_port = 0;
\$scgi_host = "unix://$scgiSocketPath";
\$XMLRPCMountPoint = "$rpcMount";
?>
EOF
			exitCode=$?
		else
			cat > "$rutConfigFile" << EOF
<?php
\$scgi_port = $scgiPort;
\$scgi_host = "$SCGI_HOST";
\$XMLRPCMountPoint = "$rpcMount";
?>
EOF
			exitCode=$?
		fi
		[ $exitCode -eq 0 ] || errorExit "Could not write to file $rutConfigFile"

		# Create user's directory to prevent certain errors the first time ruTorrent is started
		mkdir -p "$userShareDir/settings"
		mkdir -p "$userShareDir/torrents"
		chmod 0777  "$userShareDir/settings" "$userShareDir/torrents"

		# Setup rtorrent
		mkdir -p "$RTORRENT_DOWNLOAD_DIR"
		mkdir -p "$RTORRENT_WATCH_DIR"
		mkdir -p "$RTORRENT_SESSION_DIR"
		rtorrentRc="$userDir/.rtorrent.rc"
		[ -f "$rtorrentRc" ] && mv -f "$rtorrentRc" "$rtorrentRc-backup"
		cat > "$rtorrentRc" << EOF
$(if [ "$SCGI_USE_UNIX_DOMAIN_SOCKET" = y ]; then
	cat << EOF2
execute = {sh,-c,rm -f $scgiSocketPath}
scgi_local = $scgiSocketPath
execute = {sh,-c,chmod 0666 $scgiSocketPath}
EOF2
else
	echo "scgi_port = $SCGI_HOST:$scgiPort"
fi)
encoding_list = UTF-8
system.umask.set = $DEFAULT_UMASK
port_range = $rtorrentPort-$rtorrentPort
port_random = no
check_hash = no
directory = $RTORRENT_DOWNLOAD_DIR
session = $RTORRENT_SESSION_DIR
encryption = allow_incoming, try_outgoing, enable_retry
schedule = watch_directory,1,1,"load.start=$RTORRENT_WATCH_DIR/*.torrent"
#schedule = untied_directory,5,5,"stop_untied=$RTORRENT_WATCH_DIR/*.torrent"
trackers.enable = 1
#min_peers = 40
#max_peers = 100
#min_peers_seed = 10
#max_peers_seed = 50
#max_uploads = 15
#download_rate = 0
#upload_rate = 0
#trackers.use_udp = yes
dht = auto
dht_port = 6881
#protocol.pex.set = yes
#hash_read_ahead = 10
#hash_interval = 100
#hash_max_tries = 10
EOF
		PHP_BIN_PATH=$(which php 2> /dev/null)
		COMMENT=
		[ -x "$PHP_BIN_PATH" ] || COMMENT="#" PHP_BIN_PATH=/path/to/php
		cat >> "$rtorrentRc" << EOF
${COMMENT}execute = {sh,-c,$PHP_BIN_PATH $RUTORRENT_BASE_PATH/php/initplugins.php $webUser &}
EOF

		# Add user to web server's password file
		sed_i "g/^$webUser:/d" "$WWW_PASSWORD_FILE"
		$htpasswd -b "$WWW_PASSWORD_FILE" "$webUser" "$webPass" || errorExit "Could not add user to password file"
		resetAuthPasswordFilePermissions

		resetOwner "$osUser" "$rtorrentRc" "$userDir" "$RTORRENT_DOWNLOAD_DIR" "$RTORRENT_WATCH_DIR" "$RTORRENT_SESSION_DIR"

		# Required so some ruTorrent plugins work, eg. _getdir
		chmod 0755 "$userDir"

		# Protect some dirs and files, giving only the user and the web server
		# access. We need to do this since we set perms to 0755 above, or if
		# the perms already were 0755 to begin with.
		if [ -n "$WWW_GROUP" ]; then
			chmod 0600 "$rtorrentRc"
			for dir in $RTORRENT_REL_DOWNLOAD_DIR $RTORRENT_REL_WATCH_DIR $RTORRENT_REL_SESSION_DIR; do
				chown $osUser:$WWW_GROUP "$userDir/$dir"
				chmod 0770 "$userDir/$dir"
			done
		fi

		i=$(expr $i + 1)
	done

	[ "$CREATE_ONE_PASSWORD_FILE_PER_USER" = y ] && createOnePasswordFilePerUser
fi

if [ "$INSTALL_RUTORRENT" = y ]; then
	verifyWebServerVars
	resetWebServerPermissions
	resetRutorrentUserPermissions
	# Restart it just in case we enabled/installed PHP modules.
	osHandler_$os restart_$INSTALL_WEB_SERVER
fi

if [ "$INSTALL_VSFTPD" = y ]; then
	echo "${CMSG}Installing vsftpd...$CEND"
	osHandler_$os installVsftpd
fi

if [ "$INSTALL_WEBMIN" = y ]; then
	cd
	rm -rf webmin-*/ webmin*.tar.gz
	if ! downloadFile webmin.tar.gz "$WEBMIN_URL"; then
		errorExit "Could not download Webmin."
	fi
	tar xzf webmin.tar.gz
	rm -f webmin.tar.gz
	cd webmin-*/ || errorExit "Could not CD to webmin dir"
	osHandler_$os preWebminInstall
	[ -x "setup.sh" ] || errorExit "Missing Webmin setup.sh file or not executable."
	cat << EOF
$CMSG
Starting Webmin installer. Use another port than 10000, enable SSL, start webmin
at boot, and use a strong admin password.$CEND
$CWARNING
When it asks you if it should use SSL and whether it should start at boot,
type y.$CEND
EOF
	./setup.sh /usr/local/webmin
	osHandler_$os postWebminInstall
	cd
	rm -rf webmin-*/
fi

if [ "$INSTALL_RUTORRENT" = y ]; then
	# Some plugins will fail unless they can write to the /tmp directory
	# We MUST do this AFTER installing Webmin since it will reset the perms!
	chmod 1777 /tmp
fi

if [ "$INSTALL_STARTUP_SCRIPT" = y ]; then
	for packedUser in $USERS; do
		extractPackedUser $packedUser
		echo "${CMSG}Installing service for user $osUser.$CEND"
		osHandler_$os installRtorrentService $osUser
	done
fi

echo ""
echo "${CGREEN}================================= DONE =================================$CEND"
[ "$INSTALLED_RTORRENT" = y ] && echo "${CDGREEN}[+]$CEND ${CGREEN}Built and installed rtorrent with XML-RPC support$CEND"
[ -n "$INSTALL_WEB_SERVER" ] && echo "${CDGREEN}[+]$CEND ${CGREEN}Installed and configured web server ($INSTALL_WEB_SERVER)$CEND"
[ "$INSTALL_VSFTPD" = y ] && echo "${CDGREEN}[+]$CEND ${CGREEN}Installed and configured FTP server (vsftpd)$CEND"
[ "$INSTALL_RUTORRENT" = y ] && echo "${CDGREEN}[+]$CEND ${CGREEN}Installed ruTorrent$CEND"
[ "$INSTALL_STARTUP_SCRIPT" = y ] && echo "${CDGREEN}[+]$CEND ${CGREEN}Installed and started rtorrent service$CEND"
[ "$INSTALL_WEBMIN" = y ] && echo "${CDGREEN}[+]$CEND ${CGREEN}Installed Webmin$CEND"

if [ "$INSTALL_RUTORRENT" = y ]; then
	getIpAddress
	cat << EOF

${CMSG}ruTorrent URLs.$CEND ${CWARNING}Verify that the IP address below is correct!$CEND
	${CMAGENTA}http://$OUR_IP_ADDRESS/$RUTORRENT_DIRNAME/$CEND
	${CMAGENTA}https://$OUR_IP_ADDRESS/$RUTORRENT_DIRNAME/$CEND
EOF
fi

if [ "$INSTALL_RUTORRENT" = y ]; then
		cat << EOF

${CMSG}rtorrent directories$CEND:
EOF
	for packedUser in $USERS; do
		extractPackedUser $packedUser
		getRtorrentDirs "$osUser"
	cat << EOF
${CMSG}User $CGREEN$osUser$CEND:
	${CGREEN}Downloads$CEND    : $CMAGENTA$RTORRENT_DOWNLOAD_DIR$CEND
	${CGREEN}Watch dir$CEND    : $CMAGENTA$RTORRENT_WATCH_DIR$CEND
	${CGREEN}Session dir$CEND  : $CMAGENTA$RTORRENT_SESSION_DIR$CEND
	${CGREEN}rtorrent port$CEND: $CMAGENTA$rtorrentPort$CEND
EOF
	done
fi

if [ -n "$INSTALL_WEB_SERVER" ]; then
	cat << EOF

${CMSG}Web server info$CEND:
	${CGREEN}Web server root$CEND: ${CMAGENTA}$WWW_ROOT$CEND
	${CGREEN}ruTorrent dir$CEND  : ${CMAGENTA}$RUTORRENT_BASE_PATH$CEND
EOF
fi

if [ "$INSTALL_VSFTPD" = y ]; then
	getIpAddress
	cat << EOF
$CMSG
To log in to the FTP server, use your $(uname -s) login name and password. I
guessed the IP address below. Make sure it's correct.$CEND
	${CGREEN}FTP IP address$CEND: ${CMAGENTA}$OUR_IP_ADDRESS$CEND
	${CGREEN}FTP port$CEND: ${CMAGENTA}$FTP_PORT$CEND
	${CGREEN}FTP server type$CEND: $CMAGENTA$FTP_SERVER_TYPE$CEND
EOF
fi

if [ "$INSTALL_WEBMIN" = y ]; then
	getIpAddress

	WEBMIN_PORT=
	WEBMIN_SSL=
	WEBMIN_NAME=
	WEBMIN_CONFIG=/etc/webmin/miniserv.conf
	WEBMIN_USERS=/etc/webmin/miniserv.users
	if [ -f $WEBMIN_CONFIG ]; then
		WEBMIN_PORT=$(grep '^port=' $WEBMIN_CONFIG | tail -n1 | sed -e 's/^port=\([0-9]*\).*/\1/')
		WEBMIN_SSL=$(grep '^ssl=' $WEBMIN_CONFIG | tail -n1 | sed -e 's/^ssl=\([0-9]*\).*/\1/')
		WEBMIN_NAME=$(head -n1 $WEBMIN_USERS | cut -d: -f1)
	fi
	WEBMIN_PORT=${WEBMIN_PORT:-UNKNOWN}
	WEBMIN_NAME=${WEBMIN_NAME:-UNKNOWN}

	cat << EOF
$CMSG
Webmin was installed. Port is $WEBMIN_PORT and the user is $WEBMIN_NAME.
${CRED}Verify the IP address below.$CEND
EOF
	if [ -z "$WEBMIN_SSL" ]; then
		echo "	${CMAGENTA}http://$OUR_IP_ADDRESS:$WEBMIN_PORT/$CEND"
		echo "${CMSG}or:$CEND"
		echo "	${CMAGENTA}https://$OUR_IP_ADDRESS:$WEBMIN_PORT/$CEND"
	elif [ "$WEBMIN_SSL" = 0 ]; then
		echo "	${CMAGENTA}http://$OUR_IP_ADDRESS:$WEBMIN_PORT/$CEND"
	else
		echo "	${CMAGENTA}https://$OUR_IP_ADDRESS:$WEBMIN_PORT/$CEND"
	fi
fi

if [ -n "$INSTALL_WEB_SERVER" ] || [ "$INSTALL_VSFTPD" = y ] || \
	[ "$INSTALL_RUTORRENT" = y ] ; then
	if [ "$SELINUX_ENABLED" = y ]; then
		cat << EOF
$CWARNING
SELinux is enabled. It could cause some problems with the web server, vsftpd or
ruTorrent.
EOF
	fi
fi

if [ "$CREATED_CERT_FILE" = y ]; then
	cat << EOF
$CWARNING
A self-signed certificate was created. Your browser or FTP client will most
likely warn you about a non-trusted certificate.$CEND
EOF
fi

cat << EOF
$CMSG
The installation is completely done now. If you installed rTorrent (you did) then you$CEND ${CWARNING}MUST reboot now$CEND ${CMSG}for all the fixes to take effect.$CEND
EOF