The new firmware v1.16 does not recognize the factory module.

[Dead3ch]

Hello. The new firmware version 1.16 doesn't recognize the factory module from the 5Stack NRF24 cc1101. Any ideas ?

[IncursioHack]

Hi,
1- Could you test it in Beta version? What is the result in this version?
2- Have you checked if the pins are set correctly? Please inform the contents of Bruce Pins. conf
3- In another version does it work?
4- Is this the first time you've been testing this module?
5- Have you checked the manufacturer's recommendations? (we have already identified faulty modules with incorrectly configured pins)

[Dead3ch]

Hello.
1: This isn't a beta version. I might test the beta.
2: The default contacts are from version 1.16. I tried changing the contacts in the BrucePins configuration: "cs" 1 "io0" 2
3: This module works on older versions; I'm currently running version 1.12. It worked on 1.14, 1.13, 1.11, and 1.11.1.
4: This isn't my first time testing this module; I've been testing it since I bought it, when it was version 1.11.
5: No recommendations.
My homemade NRF 24 module works on version 1.16 and can see the spectrum. But it jams very poorly, which is odd...

[bmorcelli]

factory module.

funny! M5Stack don't make it..

[Dead3ch]

Забавно! M5Stack этого не делает...

The very first screenshot, I bought this module together with the Cardputer.

[bmorcelli]

Need to setup the pins for it..
ADV uses other pinouts

Edit brucePins.conf to match these values:

CC1101_cS_PIN=1
CC1101_MOSI_PIN=14
CC1101_SCK_PIN=40
CC1101_MISO_PIN=39
CC1101_io0=2
CC1101_GDO2_io2=-1


NRF24_SS_PIN=1
NRF24_MOSI_PIN=14
NRF24_SCK_PIN=40
NRF24_MISO_PIN=39
NRF24_io0_PIN=2

Pay attention to the pin names, they are not in this order.

[bmorcelli]

After editing this file, you need to restart the device..

Or flash Beta and change these values on Config > Advanced > Device pins config > ...

Changing there will apply automatically

[Dead3ch]

Нужно настроить контакты... В ADV используется другая распиновка .

Отредактируйте файл brucePins.conf, указав следующие значения:

CC1101_cS_PIN=1
CC1101_MOSI_PIN=14
CC1101_SCK_PIN=40
CC1101_MISO_PIN=39
CC1101_io0=2
CC1101_GDO2_io2=-1


NRF24_SS_PIN=1
NRF24_MOSI_PIN=14
NRF24_SCK_PIN=40
NRF24_MISO_PIN=39
NRF24_io0_PIN=2

Обратите внимание на названия пин-кодов, они расположены не в этом порядке.

Bro. There are no such pins there; I installed the beta version. NRF24
no SS, no io0. There is
CE/GDO0
NC/GDO2

[bmorcelli]

Bro, you are looking to the wrong file..

This file is on your SDCard!!

Is a json style file, you will change the objects of cc1101_bus and nrf24_bus, sck, miso, mosi, cs, io0 and io2..